LK Systems PAL 16 Assembly Instructions

LK Bending tool PAL 16, 20, 25, 32 and 40
These instructions are for LK Bending tool PAL
for dimensions 16 , 20, 25, 32 and 40. Each tool
is clearly marked with the pipe dimension it is
intended for. The bending tools for dimension 32
and 40 also have a lug so you can easily attach
them in a screw vise.
NOTE! The tools are only intended for work on
LK PAL pipes.
Art no 187 81 75 LK Bending tool PAL 16
Art no 187 81 76 LK Bending tool PAL 20
Art no 187 81 77 LK Bending tool PAL 25
Art no 188 10 68 LK Bending tool PAL 32
Art no 188 10 69 LK Bending tool PAL 40
90° bend
Figure 1 shows how the correct distance is obtai-
ned between the end of the pipe and the centre of
the bend with a 90° bend.
x
Fig 1.
Assembly Instructions | LK Bending tool PAL 16, 20, 25, 32 and 40
x
Figure 2 shows how the correct distance is obtai-
ned between the end of the pipe and the centre
of the bend with a 90° bend.
y
Fig 2.
y
EN.29.C.21.1401
1