Riverside Furniture Vogue 46170 Assembly Instructions

Riverside
email: info@riverside-furniture.com
Hardware and Parts packed with the Headboard
Headboard Panel
Headboard Legs
H-A H-B
1 pc.
Ø 5/16-18 × 2-1/4" Long
Allen-Head Bolt Allen-Head Bolt
H-D H-E
6 pcs.
5mm Allen Wrench
Ø5/16" x 19 x 2mm
Flat Washer
H-G H-H
10 pcs.
ASSEMBLY STEPS:
1. Place the Headboard Panel (H-A) face down on the soft surface.
2. Attach the Left and Right Legs (H-B) to the back of the Headboard Panel using the 2-1/4" long
Allen-Head Bolts (H-D), Spring Washers (H-F) and Flat Washers (H-G). Do not fully tighten Bolts until
after next step.
3. Attach the Stretcher (H-C) to the Legs as shown using the 1-1/2" long Bolts and Washers as before.
4. Adjust parts for correct fit if necessary and tighten all Bolts using the Allen Wrench (H-H).
5. Carefully lean the back of the assembled Headboard against the wall where the bed will be used.
H-B
(left)
Bed Room
FURNITURE
Assembly Instructions
Stretcher
1 pc. Left
H-C
1 pc. Right
Ø 5/16-18 × 1-1/2" Long
Ø5/16" x 12 x 3mm
Spring Washer
H-F
4 pcs.
Be sure to check all packing material carefully for small
parts, which may have come loose inside the carton
during shipment. To prevent possible scratches or damage,
this furniture should be assembled on a soft surface such as a
1 pc.
blanket or carpet.
H-A
H-C
Detail: B
Vogue
1 pc.
46170 4/6-5/0 UPHOLSTERED HEADBOARD
46180 6/0-6/6 UPHOLSTERED HEADBOARD
10 pcs.
Detail: A
H-B
H-C
(right)
Page 1 of 3
Made in Viet Nam
H-G
H-F
H-D
H-H
H-G
H-F
H-E
H-H