Advertisement
Quick Links
iOVI INSTALLATION GUIDE
PRODUCT FEATURES:
iOvi is perfect for highlighting features on buildings or in gardens.
LED light source for waterproofed, powerful, versatile spotlight, mounted
on an adjustable bracket.
Its compact size makes this light fitting ideally suited to any number of applications.
Designed to last in extremely harsh environments.
Monochrome. DALI optional.
Easy to install with the integrated universal power supply and connect via combined
cable gland.
RECOMMENDATIONS FOR THE USER:
1)Before the installation, make sure that there is no voltage.
2)Do not touch the fitting when it is working on / switched on
3)Do not look at the fitting directly or from a short distance.
4)Disconnect / switch off the fitting before changing the lamps
NOTES:
-Technical amendments are reserved.
-CE – Conformity mark
-The manufacturer is then discharged from liability when damage is caused by improper
use or installation.
-Clean luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use
high pressure cleaners.
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : +90 312 472 42 50 Fax : +90 312 502 74 75 Email : info@bsilighting.com
1
Advertisement
Related Manuals for BSi iOVI Fl9142
Summary of Contents for BSi iOVI Fl9142
- Page 1 iOVI INSTALLATION GUIDE PRODUCT FEATURES: iOvi is perfect for highlighting features on buildings or in gardens. LED light source for waterproofed, powerful, versatile spotlight, mounted on an adjustable bracket. Its compact size makes this light fitting ideally suited to any number of applications. Designed to last in extremely harsh environments.
- Page 2 iOVI INSTALLATION GUIDE Fl9142 - FL9143 iOvi Rigid Floor Mounting; - Holes are drilled into the ground and the fixing plugs are fastened. - The luminaire is screwed to the ground. - The screws on the mounting foot can be loosened and brought to the desired angle and the screw can be tightened again.
- Page 3 iOVI INSTALLATION GUIDE Fl9144 - Fl9145 - FL9146 iOvi Rigid Floor Mounting; -The mounting table is removed by loosening the setscrews in the luminaire sub-base. -Holes are drilled into the ground and the fixing plugs are fastened. -The energy cable from the floor is screwed into the ground by passing through the middle hole of the mounting table. Setscrew - Electrical connection is done.
- Page 4 iOVI INSTALLATION GUIDE Fl9144 - Fl9145 - FL9146 iOvi Ground Mounting; -The mounting base is removed by loosening the setscrews in the luminaire sub-base -The mounting base is screwed to the spike. -The energy cable is routed through the center of the mounting base and the mounting base is reattached to the luminaire and the setscrews are tightened.
- Page 5 iOVI INSTALLATION GUIDE Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : +90 312 472 42 50 Fax : +90 312 502 74 75 Email : info@bsilighting.com...
- Page 6 iOVI INSTALLATION GUIDE Considerations - Do not cut-off or damage the cables of the products supplied as sockets. Otherwise, water may enter to the luminaire through cable and damage the electronic parts inside. - If you make the electrical connection, except for IP.68 Terminal Block; the connections must be under IP protection.