Advertisement
Quick Links
PLUG N PLAY
WIRELESS WINCH REMOTE
Model Number: 7076
5
4
1
2
6
3
ITEMS IN THE BOX
IMPORTANT
1. USB cable
2. Mounting hardware
If your control box has any other pin
3. Pig tail (plug)
configuration other than the standard IP67
4. Remote control holder
waterproof 4 pin, use the pig tail provided
5. Remote control
(Item 3)
IP67 waterproof
6. Control box
PAGE 1
2121 Blount Road Pompano Beach, FL 33069
MileMarker.com
1.800.886.8647
Advertisement
Summary of Contents for Mile Marker 7076
- Page 1 PLUG N PLAY WIRELESS WINCH REMOTE Model Number: 7076 ITEMS IN THE BOX IMPORTANT 1. USB cable 2. Mounting hardware If your control box has any other pin 3. Pig tail (plug) configuration other than the standard IP67 4. Remote control holder waterproof 4 pin, use the pig tail provided 5.
- Page 2 PAIRING YOUR WIRELESS REMOTE TO THE CONTROL BOX Your new Mile Marker Plug N Play wireless winch remote control has already been paired with your control box at the factory. However, if your wireless remote control loses its signal to the control box, or you want to pair additional remotes (up to five), follow the instructions below to pair.
- Page 3 1. Slide plug under the solenoid box and attach accordingly on the outside of the solenoid. 2. Drill the top side of the box cover (on the right side of the Mile Marker logo), then slide in the head of the pig tail (plug).
- Page 4 WARRANTY INFORMATION Mile Marker warrants directly to the first purchaser that Mile Marker Plug N Play wireless winch remote will be free from defect in material and workmanship appearing under normal use and service for a period of 1 year. Warranty registration must be submitted at www.milemarker.com/warranty within 30 days.