Faq - Sony Walkman NW-S202 Quick Start Manual

FAQ

Q Which operating systems can be used with the player?
A IBM PC/AT or compatible computer preinstalled with one of the following
Windows operating systems:
Windows 2000 Professional (Service Pack 3 or later)/Windows XP Home Edition/
Windows XP Professional/ Windows XP Media Center Edition/Windows XP Media
Center Edition 2004/Windows XP Media Center Edition 2005
Not supported by operating systems other than above.
Q An error message appears on the computer when installing.
A Make sure the operating system (  page 11) of your computer can be used with the
player.
Q The computer does not start automatically when inserting the
supplied CD-ROM.
A The install wizard may not start when inserting the CD-ROM, depending on the
computer setting.
In this case, right-click the CD-ROM on Windows Explorer to open, and double-
click SetupSS.exe. The main menu for installing appears.
Q A computer does not recognize the player.
A Connect to another USB connector of your computer.
Q Some functions are restricted by SonicStage.
A When you use SonicStage, log on as an administrator.
Q Transferred songs from a computer cannot be played by the player.
A When transferring songs to the player, be sure to use SonicStage. Songs transferred
from other than SonicStage cannot be played by the player.
0
Q To reset the player.
The player does not work
properly.
A Press the DISP/HOME button and
 button at the same time for
more about 7 seconds to reset the
player.
All the songs and settings stored
on the player will not be erased
even when you reset it.
Q To initialize (format) the player.
A Be sure to format the built-in flash memory using the Menu mode on this player
following the procedure below. (Check all contents before formatting as all data
stored will be erased.)
1
Press and hold the DISP/HOME button in the play or stop mode until the
HOME screen appears.
2
Select (SETTINGS) – "Advanced Menu>" – "Initialize>" – "Format>" –
"OK," in this order.
Rotate the shuttle switch to select the item and press the  button to
confirm. After selecting "OK" and confirming, "FORMATTING... " appears and
formatting starts. When formatting is complete, "COMPLETE" appears.
DISP/HOME button
 button
1