Page 1
Street (Suite B) Tulsa, Ok 74055 Brief instructions for the SS-TM-IPC-700 blue cable tester (Wire tracing tone probe) (1) Connect LAN cable or telephone cable to SS-TM-IPC-700A's UTP port and the blue cable tester's UTP port, and then the connecting status, cable type and the sequence of wires as well as the serial number of the cable tester kit will be displayed on SS-TM-IPC-700A.
Page 2
Website: www.seestation.com Email: sales@seestation.com Tel: 918-872-1524 Address 11413 E 58 Street (Suite B) Tulsa, Ok 74055 (3) Cable Search LED Lamp on/ off Invoice + Invoice – Blue cable tester on/off Connect test cable or BNC cable to the SS-TM-IPC-700A’s UTP port or its CABLE SCAN (VIDEO OUT) port on the bottom.
Page 3
Website: www.seestation.com Email: sales@seestation.com Tel: 918-872-1524 Address 11413 E 58 Street (Suite B) Tulsa, Ok 74055 Note: Install two AAA batteries in your blue cable tester. (Not Included) Note: While the cable tester is receiving the audio signal from SS-TM-IPC-700A, it may be induced into adjacent or crossing cables;...