Clas Ohlson 07 LED Manual

Desk Lamp
Art. No: 18-1077/36-3349
Please read the entire instruction manual before using the product and save it for future reference.
We apologise for any text or photographic errors and any changes of technical data. If you have any
questions concerning technical problems please contact our Customer Service Department.
Safety
• The product should not be taken apart or modified.
• The desk lamp is only intended for indoor use. Do not expose the product to moisture.
The product should only be used in dry areas, never outdoors or close to liquids.
• The product must not be used if the power lead or plug has been damaged.
• Make sure the lead cannot be pinched or damaged when the lamp is used.
Position the lead in such a way that no one can trip over it.
1
Assembly
For ease of transportation, the lamp comes partially disassembled. Assemble the lamp before use:
1. Do not plug the lamp in until it has been completely assembled.
2. Slide the arm of the lamp onto the peg in the middle of the base.
3. Secure the arm to the peg using the screw.
4. Plug the lamp in.
5. Turn the lamp on using the on/off switch next to the light emitting diodes.
Cleaning
Warning: Always unplug the lamp before cleaning it.
Clean the lamp using a soft, lightly moistened cloth. Never use strong detergents or solvents.
Disposal
Sort and recycle products instead of disposing of them. All electronic products, batteries and all
packaging material should be sorted and handled according to local environmental regulations.
Specifications
Mains supply
Power lead
Power consumption
Protection class
Class1 LED product
Base plate
SELV
GREAT BRITAIN For consumer contact, please visit www.clasohlson.
co.uk and click on customer service.
ENGLISH
model: 07 LED
2
Prim. 220 – 240 V ~ 50 Hz, Sec. 12 V DC 0.42 A
1.8 m
5 W
II
14 cm diameter
3 4