Page 1
ORBI-JET™ X22 | NOZZLE FLOW RATES NOTE: Preferred thrust is 1/3 the body weight of the operator. This chart assumes 200 lb. operator (67 lb-F thrust limit). See Orbi-Jet X22 PI ORBI-JET™ X22 (PI-077) for full flow charts and associated thrust.
Page 2
(4) threads. the shipment of the product. DO NOT use the Orbi-Jet X22 if it has not been cleaned and inspected prior to starting 4. Apply anti-gall compound to the gland threads and cone on the male end of the working shift.