Download Print this page

Kaller M2 Service Instruction

Gas spring

Advertisement

Quick Links

Gas spring models
M2
MM2
MC3
MC3-SP
Strömsholmen AB
P.O. Box 216,
SE-573 23 Tranås, Sweden
Visiting Address:
Verkstadsgatan 16, Tranås
Phone:
+46 140 571 00
Email:
info@kaller.com
kaller.com
SERVICE INSTRUCTION
8100-2003-B

Advertisement

loading

Summary of Contents for Kaller M2

  • Page 1 SERVICE INSTRUCTION 8100-2003-B Gas spring models MC3-SP Strömsholmen AB P.O. Box 216, SE-573 23 Tranås, Sweden Visiting Address: Verkstadsgatan 16, Tranås Phone: +46 140 571 00 Email: info@kaller.com kaller.com...
  • Page 2 SERVICE INSTRUCTION • Always wear protective equipment incl. safety goggles and rubber gloves, whilst servicing the gas spring in a well ventilated area. Avoid direct contact with gas spring lubricants and inhalation of any exhausting gases. • Only specially trained personnel with good knowledge of the products should carry out the maintenance.
  • Page 3 Charging an incorrectly assembled spring could result in serious injury. 20) Oil and fit the color coded ring (B) so it snaps into to the groove in the guide. Charging For gas charging see Gas Charging Instruction 8200-1873 available at kaller.com...

This manual is also suitable for:

Mm2Mc3Mc3-sp