Baby changing station (with safety strap) (12 pages)
Summary of Contents for DAN DRYER 3236
Page 1
Baby Changing Mat 3236/3237 for DAN DRYER Baby Changing Stations Introduction: This document serves to provide guidelines for use of the DAN DRYER Baby Changing Mat 3236/3237. The changing mat is fixed to the changing surface after the baby changing station has been attached to the wall.
Page 2
IMPORTANT: Press firmly with your thumb onto the changing mat where the velcro pads are placed for at least 30 seconds as shown on the pictures below. Firmly rub the area around the velcro pads to attach the mat securely to the surface and get the best adhesion. Make sure to repeat this step on all (4) velcro pads. This part of the process is very important to harden the glue and fasten the velcro to the surface of the table.