Advertisement
Quick Links
PZX0 / PZX1 / PZX3 / PZX5 / PZX9 / PPZX2
PPZX9 / PZW0 / PZW1 / PZW3 / PZW8
Screen Size: 33 - 110" Guide Max. Weight: 60-120kg
*Please check model specific details before installing*
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
WARNING
01865 767676
sales@unicol.com
www.unicol.com
Revised 14/12/20
Advertisement
Related Manuals for Unicol PZX0
Summary of Contents for Unicol PZX0
- Page 1 01865 767676 sales@unicol.com www.unicol.com PZX0 / PZX1 / PZX3 / PZX5 / PZX9 / PPZX2 PPZX9 / PZW0 / PZW1 / PZW3 / PZW8 Screen Size: 33 - 110” Guide Max. Weight: 60-120kg Revised 14/12/20 *Please check model specific details before installing* WARNING Please carefully inspect the product before assembling.
- Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED Pozi Head Screwdriver OPTIONAL 13mm Spanner (adjusting tension in tilting arms) COMPONENTS DESCRIPTION Pozimount Back Plate Pozimount Arms Griplock Tags Grpilock Spacers Universal Fixing Kit Alternative Pozimount Tilting Arms Alternative Back Plates...
- Page 3 01865 767676 sales@unicol.com www.unicol.com WALL FIXING STEP 1 STEP 2 Using the 4 - 8 wall mounting slots cut out on the Utilising the tag locks and fixing pack provided with back plate, determine where you want to install your mount, attach the arms to the back of your your mount, mark it and fix into position.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STAND / TROLLEY STEP 1 STEP 2 Line the back plate up with the mount adapter, Utilising the tag locks and fixing pack provided with as shown above. Fix 4 screws from behind the your mount, attach the arms to the back of your mount adapter and into the 4 rivet nuts located on screen.