Sony Vaio PCG-FX902P Instruction & Operation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Laptop
  5. Vaio PCG-FX902P
  6. Instruction & operation manual
Sony Vaio PCG-FX902P Instruction & Operation Manual

Sony Vaio PCG-FX902P Instruction & Operation Manual

Pcg-fx900 series
Hide thumbs Also See for Vaio PCG-FX902P:
Table of Contents

Advertisement

Quick Links

N
Sony notebook user guide
P C G - F X 9 0 0 s e r i e s

Advertisement

Table of Contents
loading

Related Manuals for Sony Vaio PCG-FX902P

Summary of Contents for Sony Vaio PCG-FX902P

  • Page 1 Sony notebook user guide P C G - F X 9 0 0 s e r i e s...

  • Page 2: Read This First

    Macrovision Corporation. Reverse engineering or disassembly is prohibited. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user licence agreement.
  • Page 3 Specifications are subject to change without notice. ® NERGY ® ® As an E Partner, Sony has determined that this product meets the E guidelines for energy efficiency. NERGY NERGY ® The International E Office Equipment Program is an international program that promotes energy saving through the use NERGY of computers and their office equipment.

  • Page 4: Safety Information

    Safety information Owner's record The model number and serial number are located on the bottom of your Sony notebook. Record the serial number in the space provided here. Refer to the model and serial number if you contact VAIO-Link. Serial number: ________________________...
  • Page 5 Read this first Speakers Magnets Magnetic bracelets. Audio/video Audio and picture distortion may occur if this equipment is positioned in close proximity to any equipment emitting electromagnetic radiation. Connectivity Never install modem or telephone wiring during a severe lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

  • Page 6: Regulatory Information

    Read this first Regulatory information Sony hereby declares that this product is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (radio equipment and telecommunications terminal equipment Directive). Declaration of Conformity The European Union is targeting the free movement of goods for the internal market and to prevent technical barriers to trade. This effort has resulted in several EU Directives asking that manufacturers make their products comply with essential standards.
  • Page 7 Read this first Disposing of lithium ion batteries Do not handle damaged or leaking lithium ion batteries. Dispose of promptly and properly. Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. The battery pack used in this device may present a fire or chemical burn hazard if mistreated.
  • Page 8 Portability - The rechargeable battery pack provides hours of use without AC power. Sony audio and video quality - A high-resolution LCD screen enables you to take advantage of today’s advanced multimedia applications, games, and entertainment software. Multimedia features – Enjoy audio and video CDs as well as DVD movies.

  • Page 9: Documentation Pack

    A Troubleshooting Guide, where you can find all the basic information you need to start using your notebook as well as troubleshooting and VAIO-Link information; Your Sony Guarantee conditions; A Safety Regulations guide; A Modem Regulations guide applying to the modem.
  • Page 10 Welcome Refer to your Software Guide for information on the bundled software and the Sony applications. About the Software is a short description of the features of the software delivered with your system. Using Video software explains how to use Sony video software: DVgate, MovieShaker and Smart Capture.
  • Page 11 Welcome Your notebook and its accessories The following hardware items are in the box: main unit product recovery CD-ROMs documentation pack AC adapter rechargeable battery pack If you find an extra phone plug in the box, see Using the correct phone plug weight saver video cable phone cable...

  • Page 12: Ergonomic Considerations

    Welcome Ergonomic considerations You will be using your notebook as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations to both stationary and portable environments: Positioning your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touchpad, or external mouse.
  • Page 13 Welcome Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning far backwards.

  • Page 14: Table Of Contents

    Using your notebook Using your notebook This section describes how to start using your computer and how to use your computer’s internal and external devices. Locating controls and connectors Connecting a power source Starting your notebook Shutting down your notebook Using the keyboard Using the touchpad Using the CD-RW/DVD-ROM...

  • Page 15: Locating Controls And Connectors

    Using your notebook Locating controls and connectors Right power button CD-RW/DVD-ROM drive multi-purpose bay (page 26) (page 34) (page 20) (page 40)
  • Page 16 Using your notebook Left TV Out connector microphone connector headphone connector (page 68) i.LINK™ connector (page 71) PC Card slots (page 70) battery bay (page 75) (page 44) (page 20)
  • Page 17 Using your notebook Front LCD screen (page 32) speakers (page 70) keyboard (page 28) touchpad (page 33) left/right buttons (page 33) power indicators (page 31) battery 1 and 2 indicators (page 31) hard disk drive indicators (page 31) Num Lock indicators (page 31) Caps Lock indicators (page 31)
  • Page 18 Using your notebook Back phone line jack USB port serial connector printer connector There is a ventilation slot located near the second USB connector. Do not cover the ventilation slot when the computer is on. (page 56) monitor(VGA) connector (page 72) Ethernet connector USB port (page 73)
  • Page 19 Using your notebook Bottom release lever tilt stands (page 40) (page 11)

  • Page 20: Connecting A Power Source

    Using your notebook Connecting a power source You can use either an AC adapter or a rechargeable battery pack as a power source. Using the AC adapter To use the AC adapter, proceed as follows: Plug the cable attached to the AC adapter (1) into the DC In connector (2) on the computer. Plug one end of the power cord (3) into the AC adapter.

  • Page 21: Using The Battery Pack

    Using your notebook Using the battery pack You can use one or two batteries as a source of power. You can insert the second battery pack into the multi-purpose bay on the right-hand side of the computer. Additional battery packs are available as a separate option.
  • Page 22 Using your notebook Charging the battery pack To charge the battery pack, proceed as follows: Connect the AC adapter to the computer. Insert the battery pack. The computer automatically charges the battery (1) (the battery indicator (2) light flashes in a double blink pattern as the battery charges).

  • Page 23: Removing The Battery Pack

    Using your notebook The battery pack supplied with your computer is a lithium ion battery and can be recharged any time. Charging a partially discharged battery does not affect battery life. The battery indicator light is on while you use the battery pack as a power source. When the battery life is nearly depleted, the battery indicator starts flashing.
  • Page 24 Using your notebook Using the second battery pack You can purchase a second rechargeable battery pack. With two battery packs, you can extend the time you use your computer with battery power. When using two battery packs, the battery pack you insert first, charges first.
  • Page 25 Using your notebook Charging the second battery pack To charge the second battery pack, proceed as follows: Keep the battery pack (1+3) in the computer while it is connected to AC power. The battery indicator stops flashing when the battery is 85% full.
  • Page 26 Using your notebook Removing the second battery pack To remove the second battery pack, proceed as follows: Slide the eject lever on the bottom of the weight saver in the direction of arrow 1. Slide the release lever on the bottom of the computer in the direction of arrow 2. Remove the weight saver.

  • Page 27: Starting Your Notebook

    Using your notebook Starting your notebook To start your computer, proceed as follows: Slide the LCD lock lever (1) in the direction of the arrow, and lift the cover. Press the power button (2) of the computer until the green power indicator (3) light turns on. If necessary, adjust the brightness on the LCD display.

  • Page 28: Shutting Down Your Notebook

    Using your notebook Shutting down your notebook It is important that you shut down your computer properly so you do not lose unsaved data. To shut down your computer, proceed as follows: Click the Start button on the Windows Click Turn Off Computer. The Turn off computer dialog box appears.

  • Page 29: Using The Keyboard

    Using your notebook Using the keyboard Your keyboard is very similar to a desktop computer’s, but has additional keys that perform specific notebook-related tasks.
  • Page 30 Using your notebook Keys Escape key (1) Function keys (2) Print Screen key (3) Correction keys (4) Navigation keys (5) Application key (6) Numeric keypad area (7) Operator keys (8-11-12) ® Windows key (9) <Fn> key (10) Descriptions The <Esc> (Escape) key is used to cancel commands. The twelve function keys along the top of the keyboard are used to perform designated tasks.
  • Page 31 Using your notebook Combinations and functions with the Windows Combinations + <F1> + <Tab> + <E> + <F> + <Ctrl> + <F> + <M> <Shift> + + <M> + <R> <Fn> + + <Insert> Functions ® Displays the Windows Help and Support Center. Switches the selected button on the taskbar.
  • Page 32 Using your notebook Indicators Indicator Power Battery 1 Battery 2 Light Hard disk Num Lock Caps Lock Scroll Lock Functions Power on: lights green. Standby mode: flashes umber. Indicates the status of the battery inserted in the battery bay on the left side of the computer.
  • Page 33 Using your notebook Combinations and functions with the <Fn> key Combinations/ Feature <Fn> + (F3): speaker switch <Fn> + (F4): speaker volume <Fn> + (F5): brightness control <Fn> + (F7)*: switch to the external display <Fn> + (F8)* <Fn> + (ESC) and <Fn>...

  • Page 34: Using The Touchpad

    Using your notebook Using the touchpad The keyboard contains a cursor-pointing device, your touchpad (1). You can point to, select, drag, and scroll objects on the screen using the built-in touchpad. Action Description point Slide one finger on the touchpad to place the pointer (2) on an item or object. click Press the left button (3) once.

  • Page 35: Using The Cd-Rw/Dvd-Rom

    Using your notebook Using the CD-RW/DVD-ROM Your computer is equipped with a CD-RW/DVD-ROM drive. To insert a disc, proceed as follows: Turn on the computer. Press the eject button (1) to open the drive. The tray slides out. Place a disc in the middle of the tray with the label side facing up until the disc clicks into place. Close the tray by pushing it gently.
  • Page 36 Using your notebook When the computer is in Standby or Hibernate mode, you cannot insert or remove a disc. Make sure you seat the disc firmly over the disc drive hub fingers. If you do not seat the disc firmly, you could damage your disc drive and you may not be able to open the tray.
  • Page 37 Using your notebook To make a CD-R’s data readable on a CD-ROM drive, you need to close the session when you eject it. To complete this process, follow the instructions included with your software. Only use circular discs. Do not use discs with any other shape (star, heart, card, etc.), as this may damage the CD-RW drive.
  • Page 38 Using your notebook Do not use resident disc utilities or resident utilities to speed up the access of discs, because they may cause the system to become unstable. Make sure that the screensaver is deactivated. Region codes indicators are labelled on the DVD discs to indicate in which region and on what type of player you can play the disc.

  • Page 39: Using The Weight Saver

    Using your notebook Using the weight saver The weight saver protects the multi-purpose bay when it is empty. To attach the weight saver, proceed as follows: If another device is in the multi-purpose bay, remove it (see Removing the floppy disk drive (page 40)).
  • Page 40 Using your notebook To remove the weight saver, proceed as follows: Slide the eject lever of the weight saver in the direction of arrow 1. Slide the release lever on the bottom of the computer in the direction of arrow 2.

  • Page 41: Using The Floppy Disk Drive

    Using your notebook Using the floppy disk drive Your computer is equipped with a floppy disk drive which can be removed. When you are not using it, you can replace it with the bundled weight saver. Removing the floppy disk drive To remove the floppy disk drive, proceed as follows: Turn off the computer.
  • Page 42 Using your notebook Inserting the floppy disk drive To insert the floppy disk drive, proceed as follows: Turn off the computer. If the weight saver is in the multipurpose bay (1), remove it. Insert the floppy disk drive (2) into the multipurpose bay with the metallic part up. Continue pushing the drive into the bay until the release lever locks into place.
  • Page 43 Using your notebook Inserting a floppy disk To insert a floppy disk, proceed as follows: Hold the disk (1) with the label side facing up. Gently push the disk into the floppy disk drive (2) until it clicks into place.
  • Page 44 Using your notebook Removing a floppy disk To remove a floppy disk, proceed as follows: Wait until the LED indicator (1) turns off. Press the eject button (2) to remove the floppy disk. Do not press the eject button when the LED indicator is turned on. Otherwise, data may be lost.

  • Page 45: Using Pc Cards

    Using your notebook Using PC Cards This computer has a PC Card slot that supports Type I, II and III PC Cards. PC Cards allow you to connect portable external devices. You do not need to shut down your computer when inserting a PC Card. Inserting a PC Card To insert a PC Card, proceed as follows: Insert the PC Card into one of the PC Card slots with the label facing upwards.
  • Page 46 Using your notebook Use the lower slot for Type III PC Cards. Some PC Cards may require you to disable idle devices when using the PC Card. Make sure you use the most recent software driver provided by the PC Card manufacturer. If an “!”...

  • Page 47: Removing A Pc Card

    Using your notebook Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed correctly, your system may not work properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 6. To remove a PC Card, proceed as follows: Double-click the Safely Remove Hardware icon in the taskbar.

  • Page 48: Using The Memory Stick

    Mobile phones. There are currently two different types of Memory Stick™: The generic Memory Stick™, coloured blue. The MagicGate Memory Stick™, coloured white. You can purchase Memory Sticks™ from the Sony Style website (http://www.sonystyle-europe.com), or from your local Sony dealer.
  • Page 49 Using your notebook Why Memory Stick™? Sony's vision is to expand the world of communication, promoting the portability of digital data. The Memory Stick™ is the resulting medium, through which digital devices can be instantly connected. With it, you can download data from any compatible device, then transfer it to another in a single and instant transfer.
  • Page 50 Using your notebook Generic Memory Stick™ The original Memory Stick™, blue in colour, can be used to record image data taken with digital still cameras, etc. or data from the PC. With it, you can record, play back and transfer various kinds of data at any given time.
  • Page 51 Using your notebook MagicGate Memory Stick™ The MagicGate Memory Stick™, white in colour, records PC and image data just like its blue counterpart; the difference is it uses the MagicGate copyright protection technology. With this type of Memory Stick™, also called the MG Memory Stick™, you can enjoy the following features: 32MB, 64MB and 128MB capacity versions.
  • Page 52 MagicGate is a copyright protection technology that complies with the standards set by SDMI (Secure Digital Music Initiative, an organization working to draw up industry standard specifications in order to protect copyrights of digital music). logo indicates the copyright protection system devised by Sony. It is not meant to guarantee compatibility with other media. MagicGate MagicGate refers to the copyright protection technology used by the MagicGate Memory Stick™...
  • Page 53 (SDMI) to study technology for protecting copyrights during the electronic distribution of music. Sony offers the MagicGate Memory Stick™ and Memory Stick™ Walkman with a copyright protection function that complies with SDMI standards, thereby providing an environment where individuals can record and enjoy third-party music data without worrying about copyright infringement.
  • Page 54 Using your notebook Sony mobile phones Digital printers AIBO the Sony Entertainment Robot To find out more about the products available in your country, go to: http://www.sonystyle-europe.com...

  • Page 55: Inserting A Memory Stick

    Using your notebook Inserting a Memory Stick™ To insert a Memory Stick™, proceed as follows: Once you have stored your data from your digital device, insert the Memory Stick™ (1) into the optional PC Card adapter (2). Push the release button. The release button pops out.

  • Page 56: Removing A Memory Stick

    Using your notebook Removing a Memory Stick™ To remove a Memory Stick™, proceed as follows: Double-click the Safely Remove Hardware icon in the taskbar. The Safely Remove Hardware dialog box appears. Select the hardware device you want to unplug. Click Stop. In the Stop a Hardware device dialog box, select the device that can be safely removed from the system.

  • Page 57: Using The Modem

    Using your notebook Using the modem Your notebook is equipped with an internal modem. You need to connect a phone line to take advantage of online services and the Internet, to register your computer and software online, and to contact VAIO-Link. To connect a phone line, proceed as follows: Plug one end of the phone cable (1) into the phone line jack on the computer and plug the other end into the wall jack (2).
  • Page 58 Using your notebook Using the correct phone plug If there are two phone plugs in the box, make sure you use the correct one for the country you are in, as follows: UK: The connector can be identified by its cuboid shape and flat pins.

  • Page 59: Using Power Saving Modes

    Using your notebook Using power saving modes When you use a battery as the source of power for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.

  • Page 60: Using Hibernate Mode

    Using your notebook Using Hibernate mode The state of the system is saved on the hard disk and power is turned off. The power indicator light is off in this mode. To activate Hibernate mode, proceed as follows: Go to Start and click Turn Off Computer. Hold down the <Shift>...

  • Page 61: Connecting Peripheral Devices

    Connecting peripheral devices Connecting peripheral devices You can add functionality to your computer by connecting or using any of these peripherals. Before you connect peripherals, turn off the computer and all peripherals. Connect the power cord only after connecting all cables. Turn on the computer only after turning on all peripherals.

  • Page 62: Connecting A Port Replicator

    Connecting peripheral devices Connecting a port replicator Your notebook supports the use of an optional port replicator. Attaching a port replicator enables you to connect additional peripherals to your computer, such as a printer or an external display. serial connector printer connector monitor (VGA) connector network connector...
  • Page 63 Connecting peripheral devices Attaching your computer to the port replicator To attach your computer to the port replicator, proceed as follows: Disconnect all peripherals attached to your computer. On the bottom of the computer, lift the port replicator port cover. Press the bottom of the computer into the port replicator connector until it clicks.
  • Page 64 Connecting peripheral devices Plug the power cord (4) into the AC adapter and an AC outlet. The power indicator light turns green. When you use the port replicator for the first time, the installation of the network drivers starts automatically. When attaching your computer to the port replicator, do not attempt to insert or remove the battery pack.

  • Page 65: Disconnecting Your Computer From The Port Replicator

    Connecting peripheral devices Disconnecting your computer from the port replicator To disconnect your computer from the port replicator, proceed as follows: Turn off the peripherals connected to your computer. Pull the levers on each side of the port replicator (1) to disconnect the computer from the port replicator. Lift the computer away from the port replicator.

  • Page 66: Connecting An External Display

    Connecting peripheral devices Connecting an external display You can connect an external display to your notebook. For example, you can use your computer with the following devices: Computer display (monitor); Multimedia computer display; Projector. Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display. Connect the power cord after connecting all other cables.
  • Page 67 Connecting peripheral devices Connecting a computer display To connect a computer display, proceed as follows: Plug the display cable (1) in the monitor (VGA) connector (2) If necessary, plug one end of the display’s power cord (3) into the display, and the other end into an AC outlet.
  • Page 68 Connecting peripheral devices Connecting a multimedia computer display You can connect the notebook to a multimedia computer display that includes built-in speakers and a microphone. To connect a multimedia computer display, proceed as follows: Plug the display cable (1) into the monitor connector (2) Plug the speaker cable (3) into the headphone connector (4) Plug the microphone cable (5) into the microphone connector (6) on the computer.

  • Page 69: Connecting A Tv

    Connecting peripheral devices Connecting a TV To connect a TV, proceed as follows: Plug one end of the audio/video cable (1) into the TV Out connector (2) (yellow) and the other end into the TV. Plug one end of the sound cable (3) into the headphone connector (4) and the other end into the TV. Plug the power cord of the TV (5) into an AC outlet.

  • Page 70: Connecting A Projector

    Connecting peripheral devices Connecting a projector You can use a projector as an external display, such as the Sony LCD Projector. To connect a projector, proceed as follows: Plug the RGB signal cable (1) into the monitor connector (2) identified by the Plug the audio cable (3) (not supplied) into the headphone connector (4) identified by the Plug the RGB signal cable and the audio cable into the connector of the projector (5).

  • Page 71: Connecting External Speakers

    Connecting peripheral devices Connecting external speakers You can enhance the sound quality of your computer by connecting external speakers. To connect external speakers, proceed as follows: Plug the speaker cable (1) into the headphone connector (2). Plug the other end of the speaker cable into the external speaker. Turn down the volume of the speakers before you turn them on.

  • Page 72: Connecting An External Microphone

    Connecting peripheral devices Connecting an external microphone Your VAIO notebook does not contain an internal microphone. If you need to use a sound input device, for example to chat on the Internet, you need to plug in an external microphone. To connect an external microphone, proceed as follows: Plug the microphone cable (1) into the microphone connector (2) identified by the symbol.

  • Page 73: Connecting A Universal Serial Bus (Usb) Mouse

    Connecting peripheral devices Connecting a Universal Serial Bus (USB) mouse You can connect a USB device (e.g. mouse, floppy disk drive, keyboard, printer, …) to your computer. Before connecting or disconnecting a USB peripheral, you do not need to shut down the computer. You may need to install software (device drivers) supplied with your USB device before using the USB device.

  • Page 74: Connecting A Printer

    Connecting peripheral devices Connecting a printer You can connect a Windows Connecting a printer using the USB connector You can connect a USB printer compatible with your version of Windows To connect a printer using the USB connector, proceed as follows: Plug an optional USB printer cable (1) into the USB connector (2) identified by the computer and printer.
  • Page 75 Connecting peripheral devices Connecting a printer using the printer connector To connect a printer using the printer connector, proceed as follows: Plug the printer cable (1) supplied with the printer into the printer connector (2) identified by symbol. Plug the printer power cord (3) into an AC outlet.

  • Page 76: Connecting An I.link™ Device

    Connecting peripheral devices Connecting an i.LINK™ device Your computer includes an i.LINK™ (IEEE1394) connector, which you can use to connect to an i.LINK™ device such as a digital video camera recorder or to connect two VAIO notebooks in order to copy, delete or edit files.

  • Page 77: Connecting A Digital Video Camera Recorder

    On Sony digital video cameras, connectors labelled DV Out, DV In/Out or i.LINK™ are i.LINK™-compatible. The Sony digital video camera recorder is an example; your digital video camera recorder may need to be connected differently. If your digital video camera recorder includes a Memory Stick™ slot, you can copy images from it to your computer via a Memory Stick™. To do so, simply copy images on the Memory Stick™, then insert it into the Memory Stick™...

  • Page 78: Connecting To A Network (Lan)

    Connecting peripheral devices Connecting to a network (LAN) You can connect your computer to 10BASE-T/100BASE-TX-type networks via an Ethernet network cable. For the detailed settings and devices needed to connect to the network, consult your Network Administrator. For more information about connecting your notebook to the network, please consult the Hardware troubleshooting section of the VAIO-Link website: How to troubleshoot network problems Do not plug a phone cable into your computer network jack.

  • Page 79: Getting Help

    Getting help Getting help This section describes how to get help and support from Sony, as well as troubleshooting tips for your computer. Sony support options Sony provides several support options for your computer. Printed documentation supplied with your notebook A Getting Started brochure, where you can find a brief description of the items in your box, some specifications of your notebook, and how to set up your notebook;...
  • Page 80 Getting help Glossary refers to terms used in this manual. Refer to your Software Guide for information on the bundled software and the Sony applications. About the Software is a short description of the features of the software delivered with your system.

  • Page 81: Other Sources Of Information

    Getting help Other sources of information The online help files that accompany your software contain instructions on using the software. VAIO-Link website: if you have any problem with your computer, you can access the VAIO-Link website. Go to: http://www.vaio-link.com VAIO-Link: Before contacting VAIO-Link, try to solve the problem by reading the User Guides and help files for the peripherals or software.

  • Page 82: Troubleshooting

    Getting help Troubleshooting This section describes how to solve common problems you might encounter when using your notebook. Many problems have simple solutions. Please try these suggestions before contacting VAIO-Link. About the computer and software About the display About CDs and floppy disks About sound (page 88) About the modem...
  • Page 83 If the floppy disk drive is empty, proceed as follows to initialise the BIOS: Turn off the computer. Remove any peripheral devices connected to the computer. Turn on the computer and press <F2> when the Sony logo appears. The BIOS setup menu screen appears. Set the date (month/day/year).
  • Page 84 Getting help Press the arrow keys to select Exit (save changes) and then press <Enter>. The Save configuration changes and exit now? message appears. Make sure that Yes is selected and then press <Enter>. My computer does not shut down It is recommended that you shut down your computer using the Turn Off Computer command on the ®...
  • Page 85 Getting help My software program locks up or crashes Make sure the software is compatible with your equipment and operating system and try re-installing the software. If it still does not work, contact the software publisher or designated provider for technical support. My touchpad interprets a single tap as a double-click Open the Mouse icon in the Control Panel and change the button assignments in the Mouse Properties dialog box.
  • Page 86 Getting help About CDs and floppy disks My disc drive tray does not open Make sure the computer is turned on. Press the eject button on the drive. If the eject button does not work, you can open the tray by inserting a sharp, pointed object into the hole to the right of the eject button (depending on your model).
  • Page 87 Getting help Check the Master Volume settings of the Sounds and Audio Device Properties. If you have connected speakers externally, check the volume settings of your computer speakers and check the connections between your speakers and the computer. In the Device Manager, check that the correct drivers are installed properly. To display the Device Manager, click Start, then Control Panel.
  • Page 88 Getting help When I double-click an application icon a message such as You must insert the application CD into your CD-ROM drive appears and the software does not start. Some titles require specific files that are located on the application CD-ROM. Insert the disc and try starting the program again.
  • Page 89 Getting help About sound My speakers are not producing sound The built-in speakers may be turned off. Press <Fn>+<F3> to turn on the speakers. The speaker volume may be turned to the minimum. Press <Fn> and then press <F4> repeatedly to increase the volume.
  • Page 90 Getting help About the modem My internal modem does not work Check that the phone line is plugged into your computer. Check that the phone line is working. You can check the line by plugging in an ordinary phone and listening for a dial tone.
  • Page 91 Getting help If you are having a problem connecting with your Internet Service Provider, check that the ISP is not experiencing technical problems. If you have a second phone line available, try connecting the modem to that line.
  • Page 92 Use the manual import/export in DVgate Motion if the problems occur with third party cameras. You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices.
  • Page 93 To change the printer port mode, proceed as follows: Restart your computer. When you see the Sony logo, press <F2>. You are in the BIOS. Go to the Advanced menu. Use the minus sign on the numeric keyboard to change the printer port mode.
  • Page 94 Getting help About digital video captures and DVgate While I am recording images to a digital video device using DVgate, my system displays the message Recording to DV device failed. Check the power and cable connections to the DV device and try the operation again...
  • Page 95 Precautions Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage. Your notebook and memory modules use high precision components and electronic connectors technology. To avoid the invalidation of your guarantee by mishandling, it is recommended that: You contact your dealer to install a new memory module.
  • Page 96 Precautions Disconnect the system from its power source and from any telecommunication links, networks, or modems before you open the system. Failure to do so may result in personal injury or equipment damage. Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory Module only at an ESD workstation.
  • Page 97 Precautions Removing and installing a memory module To change or add a memory module, proceed as follows: Shut down your computer and disconnect all peripheral devices. Unplug the computer and remove the battery pack(s). Wait until the computer cools down. Turn the computer upside down.
  • Page 98 Precautions Place the memory module carefully into the slots, as shown, making sure the notches are aligned properly. Close the memory compartment cover and tighten the screw. Reinsert the battery pack(s) and turn on the computer.

  • Page 99: Other Precautions

    Precautions Other precautions On handling the hard disk On handling the LCD screen On using power source On handling your notebook On handling floppy disks On handling CDs On using the battery pack On using headphones On handling the Memory Stick™ (optional accessory) On handling the hard disk The hard disk has a high storage density and reads or writes data in a short time.
  • Page 100 Precautions On handling the LCD screen Do not leave the LCD facing the sun as it can damage the LCD. Be careful when using the computer near a window. Do not scratch the LCD or exert pressure on it. This could cause malfunction. Using the computer in low temperature conditions may produce a residual image on the screen.
  • Page 101 Precautions On handling your notebook Clean the cabinet with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.
  • Page 102 Precautions Do not use cut or damaged connection cables. Your computer cannot be connected to a coin-operated telephone, and may not work with a private branch exchange (PBX). If the computer is brought directly from a cold location to a warm one, moisture may condense inside your computer.
  • Page 103 Precautions On using the battery pack Never leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight. Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.
  • Page 104 Precautions On using headphones Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings.
  • Page 105 Glossary Glossary This section refers to terms used in this manual and elsewhere in the VAIO world. These terms and definitions have been compiled to provide you with a better understanding of your VAIO computer. Term <F1> key 10BASE-T/100BASE-TX ACPI Application recovery Application recovery CD-ROM BIOS...
  • Page 106 Glossary Term CD-ROM CD-RW DC In Docking station Driver DVD-ROM Ethernet EULA Definition Abbreviation for Compact Disc Read-Only Memory. A high-capacity optical disc, usually 650 MB in size, capable of being read from but not written to. Short for Compact Disc-ReWriteable. Compact Disc that can be used to write or rewrite data to it.
  • Page 107 MAPI Definition i.LINK™ is Sony’s version of the IEEE 1394 standard for high-speed digital serial interface. The standard is regarded in the audio/video and IT industries as the most suitable interface for connecting computers and digital audio/video devices (such as digital cameras etc.).
  • Page 108 Glossary Term maximum RAM Motherboard MPEG Operating system Partition PC Card Definition The maximum amount of RAM that your computer can contain. Once this amount is reached, you can no longer add additional RAM to your computer. The motherboard is the main circuit board inside your computer. It holds the CPU, the BIOS, the memory and so on.
  • Page 109 Glossary Term PCMCIA Pixel Port replicator Processor Product recovery CD-ROM PS/2 PSTN Definition PCMCIA (Personal Computer Memory Card International Association) is the name of the group that produced the specification for the credit card-sized plug-in boards for laptop computers. The cards used to be called PCMCIA cards, but as this was rather unpronounceable, these cards are now termed PC cards.
  • Page 110 Glossary Term Resolution RGB signal cable SDRAM Standard RAM System recovery System recovery CD-ROM Definition The degree of sharpness and clarity of an image. Resolution is expressed in pixels. Frequent computer screen resolutions are 640 x 480 pixels (VGA resolution; appropriate for a 14-inch screen), 800 x 600 (appropriate for a 15-inch screen), 1,024 by 768 (appropriate for a 17-inch screen), and 1,280 by 1,024.
  • Page 111 Term VAIO Definition Short for Video Audio Integrated Operation. Brand name covering Sony's PC products, peripherals, accessories and software. VAIO-branded items are all designed to make the best use of Sony's Audio-Video (AV) and Information Technology (IT) skills. WAN (Wide Area Network) is a computer network connected together and covering a relatively large geographical area.

This manual is also suitable for:

Vaio pcg-fx905pPcg-9g6mPcg-9g1m

Table of Contents