Adesso ZODIAC Assembly Instruction

Assembly Instructions (English)
ASSEMBLY INSTRUCTIONS FOR
ZODIAC LED ARC LAMP
Model # 2131-21/22
Upper pole
Switch
Bottom pole
Base
Wrench
Driver
1. Screw bottom pole onto base to tighten.
2. Insert cord plug into the driver.
3. In order to adjust the direction of the arc lamp
so that the arms are facing forward, please loosen
the washer on the bottom of the base using the
wrench. Once the lamp is facing the right
direction, tighten the washer back in place to
secure the base connection.
* See separate Smart Switch Instruction.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be
fully inserted. DO NOT ALTER THE PLUG.
BULB TYPE: (1) 5 x 7W Integrated LED
PARTS DIAGRAM:
1) Allen Wrench
2) Screw
3) Wrench
21 Penn Plaza Suite 909 New York, NY 10001
Tel: (212) 736 4440 Fax: (212) 736 4806
2131-21/22 1.0
www.adessohome.com