Advertisement
Quick Links
1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424
Model 1119.14HO/1119.14HO2
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
CAUTION! Prior to making any electrical connections, verify with a voltmeter that power
from the service panel is off.
HAWS warrants that this specific product is guaranteed against defective material or
poor workmanship for a period of one year from date of shipment. HAWS liability
under this warranty shall be discharged by furnishing without charge F.O.B. HAWS
Factory any goods, or part thereof, which shall appear to the Company upon
inspection to be of defective material or not of first class workmanship, provided that
claim is made in writing to Haws within a reasonable period after receipt of the
product. Where claims for defects are made, the defective part or parts shall be
delivered to the Company, prepaid, for inspection. HAWS will not be liable for the
cost of repairs, alterations or replacements, or for any expense connected therewith
made by the owner or his agents, except upon written authority from HAWS,
Sparks, Nevada. HAWS will not be liable for any damages caused by defective
materials or poor workmanship, except for replacements, as provided above. Buyer
agrees that HAWS shall not be liable for general, special, or consequential damages
claimed to arise under the contract of sale. The drinking fountain manufactured by
HAWS is warranted to function if installation and maintenance instructions provided
are adhered to. The units also must be used for the purpose for which they were
intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT:
FOR CUSTOMER SERVICE:
05/21
E-mail:
haws@hawsco.com
Drinking Fountain
LIMITED WARRANTY
1-800-766-5612
1-888-640-4297
MODEL 1119.14HO/1119.14HO2
website:
www.hawsco.com
No. 0510001123 (1)
PAGE 1 OF 7
Advertisement
Related Manuals for Haws 1119.14HO
Summary of Contents for Haws 1119.14HO
- Page 1 Haws within a reasonable period after receipt of the product. Where claims for defects are made, the defective part or parts shall be delivered to the Company, prepaid, for inspection.
-
Page 2: Installation Procedure
10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket wrench or open-end wrench. LOCATION OF UNIT: The Model 1119.14HO/1119.14HO2 Drinking Fountain is a wheelchair accessible drinking facility. The height dimensions shown, meet current ADA requirements. When installing this unit, local, state or federal codes should be adhered to. If height other than shown is required, then dimensions must be adjusted accordingly. -
Page 3: Maintenance
Open screwdriver-stop wide open while checking for leaks at all connections. Also, check waste for leaks. Model 1119.14HO (only): 5874 Series Valve – Adjust bubbler stream height using a STEP 3: small flat-head screwdriver inserted through a hole in the center of the push button for increased flow turn clockwise and for decreased flow turn counterclockwise. -
Page 4: Parts Breakdown
WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER. 05/10/21 APPROVED DATE 05/14/21 PARTS BREAKDOWN SCALE: DRAWING TYPE: SIZE: A SHEET 2021 Haws Corporation - All Rights Reserved PAGE 4 OF 7 HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. - Page 5 WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER. 05/10/21 APPROVED DATE 05/14/21 PARTS BREAKDOWN SCALE: DRAWING TYPE: SIZE: A SHEET 2021 Haws Corporation - All Rights Reserved PAGE 5 OF 7 HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
- Page 6 DRAWN: DATE: CHK'D.: PLUMBING SCHEMATIC REVISION 05/10/21 APPROVED: DATE: 05/14/21 SCALE: 1:14 DRAWING TYPE: INSTALLATION SIZE: A SHEET 2021 Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
- Page 7 0510001203.D 1119.14HO/1119.14HO2 DRAWN: DATE: CHK'D.: REVISION 05/10/21 APPROVED: DATE: 05/14/21 SCALE: 1:14 DRAWING TYPE: INSTALLATION SIZE: A SHEET 2021 Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.