Download Print this page

Yoli Journey Easylift 64 Setup & Takedown Instructions

Instant canopies

Advertisement

Quick Links

SETUP & TAKEDOWN INSTRUCTIONS
Use for the following Models:
Journey Easylift canopies can be set up and taken down with one person or two. Please see below.
Parts Included: Fully Assembled Frame ( ) Canopy Top ( ) Wall ( ) Wheeled Bag ( ) Stakes ( )
SECURING THE CANOPY TOP TO THE FRAME
1
2
3
Fig.
1A
SINGLE PERSON CANOPY SETUP
1
2
3
Fig.
1A
page 1
THANK YOU FOR PURCHASING A YOLI INSTANT CANOPY!
Please carefully review the following instructions and familiarize yourself with parts included
and how to operate your YOLI canopy. Reference parts list for names of each part noted in instructions.
JOURNEY EASYLIFT INSTANT CANOPIES
Journey Easylift 6
Journey Easylift 8
Journey Easylift
Place the canopy frame in the desired location (Fig. 1A). Position one hand on any frame leg just
below the black fastening strip and place your other hand on the lower eaves bar as shown (Fig. 1B).
Lift the frame leg slightly off the ground so all legs except the leg directly across bearing
the weight clears the ground. Take steps backwards to open the frame as much as possible (Fig. 2A).
Unfold the canopy top and place it over the open frame (Fig. 3A). Secure each corner by attaching
the corner of the canopy top to the black fastening strip (Fig. 3B). Pull all 4 corners down until
completely over black fastening strip. Your canopy top is now secure to the frame.
Fig.
1B
Place the canopy in the desired location for shade. Position one hand on any frame leg just below the black
fastening strip and place your other hand on the lower eaves bar as shown (Fig. 1A). Lift the frame leg slightly
off the ground so all legs except the leg directly across bearing the weight clears the ground. Take steps
backwards to open the frame as much as possible (Fig. 1B).
Before proceeding, make sure canopy top is over the eaves on all 4 sides as shown in (Fig. 2A). Stand in the
middle of the eaves between two legs and place your hands on the eaves and lift to gain entrance to the
underside of the canopy (Fig. 2B). Once underneath, place your hand on the black center hub as shown
in (Fig. 2C) and push up twisting the hub a ¼ turn clockwise to lock in the frame.
Each leg has
height adjustments. (Journey EasyLift 6 has
out the inner leg to desired height (Fig. 3A). Repeat for other
Fig.
1B
Fig.
2A
heights adjustments). Lift outer leg up and slide
legs. Your canopy is now set up.
Fig.
2A
Fig.
2B
Fig.
3A
Fig.
3B
2C
Fig.
Fig.
3A

Advertisement

loading

Summary of Contents for Yoli Journey Easylift 64

  • Page 1 THANK YOU FOR PURCHASING A YOLI INSTANT CANOPY! Please carefully review the following instructions and familiarize yourself with parts included and how to operate your YOLI canopy. Reference parts list for names of each part noted in instructions. JOURNEY EASYLIFT INSTANT CANOPIES SETUP &...
  • Page 2 SECURING YOUR CANOPY: To harness your canopy to the ground, insert the included metal stakes into each foot corner. For additional stability, you can purchase from our Customer Support Center anchor bags custom designed to secure quickly to each leg for additional weight on any surface. SINGLE PERSON TAKE DOWN Slightly lift a leg and depress the push button to unlock the inner leg and telescope into the outer leg as shown (Fig.
  • Page 3 TWO PERSON CANOPY SETUP Place the canopy in the desired location for shade. With partner standing on the opposite side of the canopy, hold the outer legs and lift slightly off the ground stepping backwards (Fig. 1A). With partner hold the top and bottom of the eaves as pictured in (Fig. 1B) lifting slightly off the ground walking backwards to extend the frame.
  • Page 4 YOLI CARRY BAG INSTRUCTIONS Models: Journey Easy Lift 6 Journey Easy Lift 8 Close your instant canopy completely as shown in (Fig. 1A). Unzip the carry bag at end and place open end of carry bag over the top of the canopy (Fig. 2A).

This manual is also suitable for:

Journey easylift 81Journey easylift 100