Connect to Computer 1. Connect the docking station to a laptop or mobile device directly with the USB-C connector. Compatible with Windows 8, 8.1, 10 32-bit/64-bit, macOS 10.10 and newer, ChromeOS, and Linux (RedHat and Ubuntu)
Page 4
2. Allow a few seconds for the system to initialize “InstantView” folder. If the folder doesn’t open automatically, you may find it under “This PC” for Windows or open from the pop-up message. macOS may find it on desktop. Microsoft Windows: macOS:...
Page 5
3. You may now connect USB, HDMI, ethernet, and audio devices. To activate external monitors, connect them with HDMI cables, then select and run the .exe file matching to your operating system from the InstantView folder. Microsoft Windows: macOS:...
Page 6
4. The InstantView will instantly enable the external displays and start in mirror mode. The status bar at the bottom of the screen will indicate when the dock and devices are not properly connected. 5. Extended Mode can be enabled for Windows / Mac by installing optional drivers from the Driver-Less InstantView Interface.
Page 7
Connect to Android Smartphone 1. Download the “Accell Driver-Less” App from Google Play Store. 2. Connect the dock to your smartphone and launch the Accell Driver-Less App. The connected external monitor(s) will be enabled, ready for screen sharing and presentation.