Advertisement
Quick Links
Please ensure you follow the operating instructions for the light that has been purchased.
Read entire manual carefully before installing and keep for future use.
Do not allow children to install or operate the light.
Do not install the light in poor weather conditions, especially when lightning is present.
Ensure the area where the light is being installed is free from obstructions such as underground
wiring, rocks and sprinklers.
Ensure the area where the light is being attached is free from wires, plumbing or other obstructions.
If using a ladder, ensure the footing is secure before climbing and obtain assistance when needed.
Wear protective equipment such as safety glasses, dust masks and gloves when installing the light.
Ensure the area where the light is being installed is structurally sound and will support the light.
Do not hang anything from the light.
Do not allow snow, leaves or other objects to rest on top of the light.
WARNING: Ensure the area where the light is being installed is free from obstructions such as underground wiring,
rocks and sprinklers.
IMPORTANT: Ensure that the location of where the light will be installed allows for adequate sunlight throughout the
day to charge the battery sufficiently. Be mindful of overhangs or shaded areas.
1. Unfold the light and remove any packaging.
2. Remove the ground stake from the light.
3. Place the ground stake in the desired area, ensure the stake is level and
press firmly into the ground. Do not use any metal hammer to drive into the
ground. If the stake is hitting any obstruction, preventing it from going into
the ground, try a new location.
4. Once the stake is firmly in the ground place the light on top of the stake post.
5. djust the angle of the solar panel and the light by loosening the knobs on
the side of the light.
IMPORTANT: Do not remove the bolt/knob completely. Only loosen to allow for
adjustments.
6. Once the light and the panel are at the desired angle, tighten the knob to lock
into place.
Solar Powered LED Landscape Lights
Models: NLS65W2 and NLS65C2
NOTE: This manual is for two different models.
WARNINGS AND SAFETY INSTRUCTIONS
Installation (Ground)
Advertisement
Related Manuals for Nitelighter NLS65W2
Summary of Contents for Nitelighter NLS65W2
- Page 1 Solar Powered LED Landscape Lights Models: NLS65W2 and NLS65C2 NOTE: This manual is for two different models. Please ensure you follow the operating instructions for the light that has been purchased. Read entire manual carefully before installing and keep for future use.
- Page 2 Installation (Wall) WARNING: Ensure the area where the light is being attached is free from wires, plumbing or other obstructions. WARNING: If using a ladder, ensure the footing is secure before climbing and obtain assistance when needed. IMPORTANT: Ensure that the location of where the light will be installed allows for adequate sunlight throughout the day to charge the battery sufficiently.
- Page 3 When the light is placed in the ON position, every night the light will come on and remain illuminated for 8-10 hours (dusk to dawn). NLS65W2 – White Light Only NLS65C2 – utomatic Color Change and White Light 1.
- Page 4 Warranty SPQ warrants the light to be free from manufacturer defects. Inspect thoroughly before installation and install the light with care. Defects that occur due to improper installation, environmental conditions, cts of God or improper handling is not covered by this warranty. ny modifications to the light will void the warranty. This warranty is only valid within the Conti- nental US and Canada.