Summary of Contents for Ledridge Lighting LED72-12V-IP20-30K
Page 1
LED72 - PRODUCT INFORMATION TECHNICAL SPECIFICATION RoHS PART CODE LED72-12V-IP20-30K LED72-24V-IP20-30K IP RATING IP20 IP20 INPUT VOLTAGE 12V DC 24V DC WATTAGE 7.2W / m 7.2W / m WIDTH 10mm 10mm HEIGHT LUMEN 3000K 500lm / m 500lm / m >80...
LED72 - PRODUCT INFORMATION INSTALLATION WARNING! IF IN DOUBT CONTACT US: 0116 246 1188 Read this section before any installation work is carried out. All work should be carried out as per our instructions. Failure to do so may damage the unit and other products associated with it and void any warranty. All work involving electrical components should be carried out We are only able to offer advice and installation instruction on our own by a competent qualified electrical professional in accordance to...
Page 3
LED72 - PRODUCT INFORMATION INSTALLING WITHOUT DIMMING INTERFACE 1. Ensure all mains power is turned off. 2. Ensure the surface where your LED tape and aluminium are to be installed are clean and dry. 3. Fix the Aluminium strip to the surface. The aluminium strip can be fixed into place with either screws or using a grab adhesive.
Page 4
LED72 - PRODUCT INFORMATION INSTALLING WITH DIMMING INTERFACE 1. Ensure all mains power is turned off. 2. Ensure the surface where your LED tape and aluminium are to be installed are clean and dry. 3. Fix the Aluminium strip to the surface. The aluminium strip can be fixed into place with either screws or using a grab adhesive.
2 year standard warranty, effective for 24 months from the date of purchase. 1.1 Subject to the conditions set out below the Seller (Ledridge Lighting) warrants that the Goods will correspond with their written specification (if any) at the time of delivery and will be free from material defects in materials and workmanship for a period as stated above from the date of purchase or for such longer period as the Seller (in its absolute discretion) may determine.