Download Print this page

WilTec VM-SL09N Installation Manual

Tv-wall mount bracket

Download this manual

Installation Guide

TV-Wall Mount Bracket

VM-SL09N – Article: 50503

Max. lifting capacity 18 kg

standard size of device: 13-30"(33-76 cm)

Technical changes reserved!

Due to further developments illustrations, functioning steps and technical data can differ insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities please contact us.

Seite 1

http://www.wiltec.info

Page 1 Technical changes reserved! Due to further developments illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 1 http://www.wiltec.info...
Page 2 The wood has to be at least 5 mm pre-drilled. The wall has to carry the weight of the TV. If you are uncertain about the wall quality, consult a specialist! The manual guide does not replace special training. © by WilTec Wildanger Technik GmbH Seite 2 http://www.wiltec.info...
Page 3 2. To complete the installing, hook both perpendicular brackets into the backside of the screen, in both horizontal cross bars. 3. When hooking into, make sure that the safety screws of the mount are not screwed in. © by WilTec Wildanger Technik GmbH Seite 3 http://www.wiltec.info...
Page 5 Königsbenden 12 / 28 D-52249 Eschweiler Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of Wiltec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Seite 5...

50503