Download Print this page
Eartec ComStar-S User Manual

Eartec ComStar-S User Manual

Full duplex wireless

Advertisement

Quick Links

FULL DUPLEX WIRELESS COMMUNICATION SYSTEM
user manual
Introduction
Thank you for your choice of
FULL DUPLEX WIRELESS COMMUNICATION
SYSTEM.
This is a DECT (Digital Enhanced Cordless Telecommunications) duplex wireless system. To the quality of
audio and to the safety offered from the digital technology, The offers manifold and useful features including
multi-headset capabilities and multi-volume select. Please read this
duplex wireless system, LED In use illumination,
instruction carefully before using your new system for the first time.
A glance guide for the headset
ComStar-S(HDST1915)
ComStar-D(HDST1915)
ComStar Xtreme(HDST1915)
ComStar XTC(HDST1915)
ComPAK(BPK1015)
Power on/off
Power on/off
Vol down
Power on/off
Vol up
Vol up
Vol down
Vol up
Vol up
Vol down
Vol down
A glance guide for the base unit
Flex Max COM Center(FLX2015)
COM Center Pro2000(PRO2015)
ComSTAR XTC Base(XTCB2015)
All Conference
SUB key
B channel indicator (RED LED)
Vol Down
Vol up
Connector for Cord Headset
All Conference
A channel indicator (GREEN LED)
Installation
Please check your package that included the following items:
-Base Unit (
)
Flex Max COM Center(FLX2015)/ COM Center Pro2000(PRO2015)/ ComSTAR XTC Base(XTCB2015)
-Wireless Headset (
)
ComStar-S(HDST1915)/ ComStar-D(HDST1915)/ ComStar Xtreme(HDST1915)/ ComStar XTC(HDST1915); ComPAK(BPK1015)
-Wire Headset (
)
Max 3G-S / Max 3G-D
-AC / DC adaptor for Base Unit
- Base packing batterie
- Headset packing batterie
Choose a suitable site for the base unit, make sure it is not near to other electrical equipments.
Page 1

Advertisement

loading

Summary of Contents for Eartec ComStar-S

  • Page 1 Please check your package that included the following items: -Base Unit ( Flex Max COM Center(FLX2015)/ COM Center Pro2000(PRO2015)/ ComSTAR XTC Base(XTCB2015) -Wireless Headset ( ComStar-S(HDST1915)/ ComStar-D(HDST1915)/ ComStar Xtreme(HDST1915)/ ComStar XTC(HDST1915); ComPAK(BPK1015) -Wire Headset ( Max 3G-S / Max 3G-D -AC / DC adaptor for Base Unit...
  • Page 2 Connect the AC adaptor socket to the Base Unit and the power socket. Turn on the power of base. SUB key A1-A4, B1-B4 Under Bottom Power on/off Power on/off Charging indicator Charging indicator AC Adapter socket And low battery indicator AC Adapter socket And low battery indicator battery pack...
  • Page 3 If you go back to the located range again, the communication link will restore, also the “In use” LED will blanking steadily. Note: your talk will be cut without any audible warning tone if you are in a talk and out of the located range. Registration The headset and base shall be factory pre-registered with the identification digital security codes, which are stored into the non-volatile memory, so that your headset shall be ready for working after out-of-box.
  • Page 4 for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies.

This manual is also suitable for:

Comstar-dComstar xtremeComstar xtcCompakHdst1915Bpk1015