Advertisement
Quick Links
1. AFTER OPENING CARTON,
REMOVE INNER CARTON
AND INSTALL CASTERS TO
CABINET AS SHOWN IN
FIGURE #1. GENTLY ROLL
CABINET OVER AND SET
UP ON CASTERS.
2. REMOVE CONTENTS FROM
INNER CARTON AND PLACE
ON FLAT WORKING SURFACE.
PLACE RISER TOP WITH
WITH 5MM HOLES FACING UP.
NEXT ATTACH CAM LOCK PINS TO
RISER TOP USING PRE-DRILLED
HOLES. ALIGN HOLES IN RISER
END RAILS WITH CAM LOCK PINS
ON RISER TOP AND SECURE
BY USING A SCREW DRIVER TO
TURN CAM LOCK CLOCKWISE TO
TIGHTEN. AS SHOWN IN FIGURE #2
BELOW.
MODEL: A680
ASSEMBLY INSTRUCTIONS
FIGURE #1
INNER CARTON
FIGURE #2
NON-LOCK
CASTERS
SCREWDRIVER
CAMLOCK
BOTTOM RAIL
RISER TOP
10/24/2018
LOCKING
CASTER
RISER SIDE RAIL
CAM LOCK PIN
Advertisement
Related Manuals for AccuQuilt A680
Summary of Contents for AccuQuilt A680
- Page 1 MODEL: A680 10/24/2018 ASSEMBLY INSTRUCTIONS NON-LOCK FIGURE #1 CASTERS LOCKING CASTER INNER CARTON 1. AFTER OPENING CARTON, REMOVE INNER CARTON AND INSTALL CASTERS TO CABINET AS SHOWN IN FIGURE #1. GENTLY ROLL CABINET OVER AND SET UP ON CASTERS. FIGURE #2...
- Page 2 MODEL: A680 10/24/2018 ASSEMBLY INSTRUCTIONS RISER DROP LEAF FIGURE #3 USING THE PROVIDED 2" CONNECTOR BOLTS, INSERT THROUGH THE BOTTOM OF THE DROP LEAF CONNECTING RISER TO DROPLEAF. NOTE: RISER CAN BE ATTACHED TO EITHER DROP LEAF. DRAWER 2" CONNECTOR BOLT...