UniPOS RI31 Instruction Manual

ÏÐÅÄÍÀÇÍÀ×ÅÍÈÅ
Èçíåñåíèÿò ñèãíàëèçàòîð e ïðåäíàçíà÷åí äà äóáëèðà ñèãíàëà çà ïîæàð îò
ïîæàðîèçâåñòèòåëèòå. Ñèãíàëèçàòîð RI31 ñèãíàëèçèðà ñâåòëèííî, à RI31S - çâóêîâî.
Ñúùèòå ìîãàò äà ñå èçïîëçâàò è ñàìîñòîÿòåëíî çà ñâåòëèííà è çâóêîâà ñèãíàëèçàöèÿ êúì
äðóãè ñèñòåìè è óñòðîéñòâà.
ÒÅÕÍÈ×ÅÑÊÈ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
Çàõðàíâàùî íàïðåæåíèå
Âèä íà ñâúðçâàùàòà ëèíèÿ êúì ïîæàðîèçâåñòèòåëÿ- äâóïðîâîäíà
Öâÿò íà ñâåòëèííàòà ñèãíàëèçàöèÿ /RI 31/
Çâóêîâî íàëÿãàíå /RI 31S/
Ñòåïåí íà çàùèòà
Ðàáîòåí òåìïåðàòóðåí äèàïàçîí
Óñòîé÷èâîñò íà îòíîñèòåëíà âëàãà
Ãàáàðèòíè ðàçìåðè
Ìàñà íà èçäåëèåòî
ÓÑÒÐÎÉÑÒÂÎ
Èçíåñåíèÿò ñèãíàëèçàòîð ñå ñúñòîè îò êàïàê è îñíîâà. Íà îñíîâàòà å çàêðåïåíà ïå÷àòíà
ïëàòêà ñ êëåìà è ñâåòîäèîä /RI 31/ èëè ïèåçîêðèñòàëåí çâóêîâ èíäèêàòîð /RI 31S/ - âèæ Ôèã 1.
Ïî çàÿâêà ñèãíàëèçàòîðèòå RI 31 è RI 31S ìîãàò äà ñå äîñòàâÿò è ñ òðèâõîäîâî óïðàâëåíèå.
Ïðè ñàìîñòîÿòåëíî èçïîëçâàíå äà ñå èìà ïðåäâèä ñòîéíîñòòà íà ðåçèñòîðà R è
çàõðàíâàùîòî íàïðåæåíèå.  òîçè ñëó÷àé å îïðåäåëÿù äîïóñòèìèÿ òîê ïðåç ñâåòîäèîäà
/ïèåçîèçëú÷âàòåëÿ/.
ÌÎÍÒÀÆ
1. Äà ñå ñâàëè êàïàêúò ïîñðåäñòâîì í
2. Äà ñå çàêðåïè îñíîâàòà êúì ñòåíàòà èëè òàâàíà ïîñðåäñòâîì äþáåëè Ø8 mm è
âèíòîâå çà äúðâî (Ø3õ35) mm.
3. Äà ñå ïðåêàðàò ìîíòàæíèòå ïðîâîäíèöè ïðåç îòâîðà íà îñíîâàòà è äà ñå ñâúðæàò
êúì êëåìèòå "+" è "-" íà ïëàòêàòà.
4. Äà ñå ìîíòèðà êàïàêúò êúì îñíîâàòà.
ÃÀÐÀÍÖÈÎÍÍÈ ÇÀÄÚËÆÅÍÈß
Ãàðàíöèîííèÿò ñðîê íà èçäåëèåòî å 24 ìåñåöà îò äàòàòà íà ïðîäàæáàòà, ïðè óñëîâèå
÷å ñà ñïàçåíè èçèñêâàíèÿòà íà íàñòîÿùèÿ ïàñïîðò.
INTRODUCTION
Remote indictor has been designed to duplicate the alarm signal for fire condition, given by the fire
detectors. Remote indicator RI 31 gives out a light signal, RI 31S gives out a sound signal. The
devices can be used independently for light and sound signalling when included in other systems.
TECHNICAL DATA
Power supply
Connection to fire detector
Colour of he light signalling /RI 31/
Sound pressure /RI 31S/
Degree of protecion
Operational temperature range
Relative humidity resistance
Dimensions
Weight
STRUCTURE
The Remote Indicator consists of a cover and a base. A circuit board with a terminal and a LED
/RI 31/ or piezocrystal sound indicator / RI 31S/ are mounted on the base - see Fig.1.
Upon customers request the remote indicators RI 31 and RI 31S can be delivered with a three input
control.
When used independently, you should consider the value of te resistor R and the power supply. In
this case the permissable current through the LED /piezo emitter/ shall be determinant.
MOUNTING
1. Remove the cover by pressing the click.
2. Fix the base on the wall or ceiling, using the appropriate fixings.
3. Feed the connection cable through the cable entry in the centre of the base and connect it to
the terminals "+" and "-".
4. Replace the cover on the base.
WARRANTY
The warrant period is 24 months from the date of purchase, providing that the
requirements stated in the service schedule have been observed.
Ïðîèçâîäèòåë: ÓíèÏÎÑ ÎÎÄ, Ð Áúëãàðèÿ, 5800 Ïëåâåí, óë.Ñàí Ñòåôàíî 47, http://www.unipos-bg.com
ÈÇÍÅÑÅÍ ÑÈÃÍÀËÈÇÀÒÎÐ
RI31 (RI31S)
ÒÈÏ
ÏÀÑÏÎÐÒ 07-RI31-RI31S-03-17
àòèñêàíå íà ïàëåöà.
REMOTE INDICATOR
RI31 (RI31S)
TYPE
INSTRUCTION MANUAL 06-RI31-RI31S-05-11
- (5 - 30)V DC
- ÷åðâåí
- íå ïî- ìàëêî îò 60dB
- IP 40
o
- îò ìèíóñ 10 Ñ äî 55 Ñ
+3
- (92 )% ïðè òåìïåðàòóðà 40 Ñ
-2
- (75õ75õ22) mm
- 0,040 kg
- ( 5 - 30)V DC
- two-wire line
- red
- at least 60 dB
- IP 40
o o
- minus 10 Ñ to 55 Ñ
+3 o
- (92 )% at 40 Ñ
-2
- (75õ75õ22) mm
- 0,040 kg
o
o