GATEMASTER BDG1030 Specification Sheet

SUPERLOCK DIGITAL
DOUBLE SIDED
Easy to fit - Slim 70mm wide lock case along with adjustable and removable latchbolt ensure easy
fitting to gates.
Secure - The latchbolt moves 15mm ensuring the bolt enters deep into the gatepost.
Durable - The latchbolt is supported on the edge of the gatepost to reduce friction and wear.
Non handed - Suits both left and right hand gates
This lock has keypads on both sides
PRODUCT DETAILS
Product code: Description:
BDG1030 To fit 10-30mm gate frames
BDG4060 To fit 40-60mm gate frames
INSTALLATION
1. Drill 2 x 9mm holes at 140mm centres for fixing bolts provided.
2. Drill 18mm clearance hole for the latchbolt at 60mm centres up
from the bottom fixing hole.
3. Hold the lock against the back of the box section and screw on the latchbolt
through the 18mm hole.
4. Lock the latchbolt with the hex key supplied by inserting the hex key into
the end of the latchbolt.
5. Fix lock in place using the stainless steel bolt support plate and the
countersunk screws provided. Ensure the latchbolt moves freely.
6. Fix stike plate by either welding or screw fixing onto the gate post
7. MAINTENANCE Every 6 months, lubricate the latchbolt with light oil.
Annually, dismantle the lock and spray mechanism with light oil.
VISIT SIGNETLOCKS.CO.UK FOR MORE INFORMATION
© Copyright Gatemaster 2019
www.signetlocks.co.uk
SPECIFICATION
SHEET
191
+44 (0)1243 552066