Page 2
Subwoofer Owner’s Manual Enclosures ENCLOSURE INFORMATION Phoenix Gold subwoofers are over engineered and overbuilt in virtually every way conceivable. It is important that the subwoofer’s enclosure is built to these same exacting standards. The enclosure must be constructed of at least .75 inch MDF. Screws or air staples are excellent construction fasteners when used with a strong bonding “yellow”...
Page 3
Subwoofer Owner’s Manual system diagrams Dual 4 ohm Subwoofer Ti12d SINGLE SUBWOOFER SYSTEM R500.1 + (1) Ti12d All voice coils are wired in parallel for 2 ohm load. R250.1 and R500.1 make maximum power into 2 ohm load. Toutes les bobines mobiles sont câblées en parallèle de 2 Ohms.