FEINMETALL FZWZ-SET-001 Quick Start Manual

TOOLS / ACCESSORIES
FZWZ-SET-001
Mounting tool for twist proof
receptacles
With the removal tool, receptacles
can be removed from a bore
without damaging it. This is also
possible with broken receptacles or
if you do not have the possibility to
knock the receptacles out from the
back.
Basic Kit FZWZ-SET-001
Available guiding sleeves (HZ) and thread inserts (BZ):
Combination:
• BZ-075-01-1 & HZ-075-01-1
• BZ-100-01-1 & HZ-100-01-1
• BZ-100-02-1 &HZ-100-01-1
• BZ-100-02-1 & HZ-100-02-1
• BZ-118-01-1 & HZ-118-01-1
• BZ-157-01-1 & HZ-157-01-1
• BZ-157-01-1 & HZ-157-01-2
Further variants are updated on the homepage under
Below you will find step-by-step instructions for handling the tool.
Edition 08/2020. All rights reserved. Further versions can be found at
Assembly
01 - Handle (GSFZWZ)
02 - Thread insert (BZ)
03 - Guiding sleeve (HZ)
04 - Screw-nut
03
04
Contents:
• Handle and
screw nut
• Box for single parts
• pliers
• Each one BZ-100-01-1
and HZ-100-01-1
Receptacles:
H121; H075; H175; H176; H310; H561; H701; H863
H722; H727; H732; H752; H756; H757; H772; H875; H878
H320; H610; H865
H100; H502; H708; H731; H751; H805
H563, HVF3
H762; H866; H867; H887
H723; H733; H737; H760; H761; H773; H774; H880; H881; H884; H885, HVF4
PRODUCT FINDER/ACCESSORIES-CP/FZWZ.
01
02
Important:
Always lock the tool
before mounting!
www.feinmetall.com