Page 2
Supplied Parts List Bracket Hook Snap Link Bolt Anchor A(x2) B(x2) C(x2) D(x6) E(x6) Step 1 Step 2...
Page 3
Step 3 Option A Wood Stud Mark the position with your Bubble Level & pencil on the wall. Drill 3/16"(4.5mm) diameter x 2”(50mm) length holes at the marked position, attach the mount to wood stud and tighten using Bolt with screwdriver. (Screwdriver not included) 50mm 50mm...
Page 4
Installation Options Option A Wall Installation To install further away from the wall. (Hook not included) Option B Ceiling Installation ! Securely mount to wood stud, brick or concrete ceilings. Can NOT mount to drywall.