Download Print this page

Advertisement

Quick Links

OWNERS MANUAL
BUCKER
CONVEYOR

Advertisement

loading

Summary of Contents for CenturionPro BUCKER

  • Page 1 OWNERS MANUAL BUCKER CONVEYOR...
  • Page 2 TABLE OF CONTENTS TABLE OF CONTENTS WARRANTY SAFETY COMPONENT OVERVIEW - BUCKER CONVEYOR VARIABLE SPEED CONTROL ASSEMBLY BELT ADJUSTMENT CLEANING SPECIFICATIONS CONVEYOR POSITIONING TOOL REQUIREMENTS CONVEYOR CONNECTIONS SIZE TOOL ITEM 3/16" T-Handle Allen Wrench CANADA, USA, MEXICO & JAPAN CONNECTOR PLUG 9/16"...
  • Page 3 CenturionPro machines are intended for use on legal aromatic herbs and hops. Please check all municipal, provincial/state and federal laws and regulations before using these machines. CenturionPro Solutions does not promote or condone the use of these products in any way that may be deemed illegal.
  • Page 4 SAFETY BEFORE YOU START IMPORTANT SAFETY INFORMATION We cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task. Always follow the proce- dures and precautions in this owner’s manual. Other uses could result in injury to the operator or damage to the Conveyor and other property. Safety Precautions Make sure all motors are off and power cords are unplugged before you begin any cleaning, maintenance or repairs.
  • Page 5 OWNERS MANUAL BUCKER CONVEYOR COMPONENTS - BUCKER CONVEYOR * Make sure the machine is unplugged when doing any cleaning or maintenance. * The Motor & Speed Control Box are not waterproof. Do not get them wet. * The Speed Control Box comes with a 2 year warranty.
  • Page 6 CONVEYOR ASSEMBLY STEP 1 CONNECT THE CONVEYOR BED AND THE CONVEY- OR LEGS AS FIGURE ILLUSTRATES. MAKE SURE THAT THE CONVEYOR BED IS CENTERED ON THE CONVEY- OR LEGS. TIGHTEN BOLTS AND NUTS TOGETHER. 3/16" T-HANDLE ALLEN WRENCH. 9/16" WRENCH. STEP 2 INSTALL CONVEYOR GUARDS TO TOP OF CONVEYOR SIDE RAILS AS SHOWN.
  • Page 7 CONVEYOR POSITIONING SPECIFICATIONS BUCKER CONVEYOR: BUCKER CONVEYOR POSITION THE BUCKER OVER TOP OF THE CONVEYOR SO THAT 1.1 Amp - 120V 60 Hz, NA Input Voltage PRODUCT CAN DROP ONTO THE CONVEYOR. THE CONVEYORS 0.55 Amp - 220V 50 Hz, EU/AUS...
  • Page 8 cprosolutions.com 1 855 535 0558 sales@cprosolutions.com FOLLOW US ON:...

This manual is also suitable for:

Bucker conveyor