Adesso Garrett Assembly Instruction

Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
Garrett Floor Lamp
Model# 4259-01
1. Screw pole (B) onto base (A) clockwise until tight.
2. Screw pole (B),(C), (D) and (E) together.
3. Install curved tube (H) onto pole (E), tighten
screw (F) with Allen wrench (G)
Note: The Arc lamp should face forward with
the arms reaching over the base.
4. Socket ring comes pre-assembled to the socket.
Before placing the shade onto the socket, please
unscrew this socket ring.
5. Place shade (I) onto socket and tighten it with
socket ring (J).
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to
reduce the risk of electric shock (one blade is larger than
the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician.Do not use with an extension cord unless the
plug can be fully inserted.
PLUG .
-------------------------------------------------------
BULB TYPE: Use only with 1 type A Max 100W
bulbs (not included).
PARTS DIAGRAM
(2) * Set Screw (F)
th
353 West 39
Tel: (212) 736 4440 Fax: (212) 736 4806
4259-01
DO NOT ALTER THE
(1)* Allen wrench (G)
nd
Street, 2 Floor, New York, NY 10018
www.adessohome.com
1.0