Lacewing CAN0019 Instructions

Lacewing Door Canopy
60x120cm
1
3
ST4
J4
F2
S8
P1
● Use soft cloth or sponge and mild household detergent solution to clean.
● Rinse with lukewarm or cold clean water.
● Do NOT use acetone,abrasive cleaners or other special detergents to clean the
clear panels.
● Do NOT scrub with brushes or abrasive materials as it can cause damage to the surface.
●
Keep roof clear of debris such as snow, leaves ect.
Please read these instructions carefully before you start to assemble this Door Canopy. Please ensure that you locate all parts in the carton box and identify
that it is the correct type and quantity as mentioned in the list and illustrations. Please carry out the steps in the order set out in this instruction. Do not fully
tighten fixings of the frame until completing the assembly of the polycarbonate panels. Keep this instruction booklet in a safe place for future use & reference.
2
2 1
1
4
1
●
Work gloves
4
●
Safety goggles
●
Step ladder
4
● Drill
● Phillips head screwdriver
1
● Measuring tape
CAN0019/CAN0020
●
●
● All component parts should be checked and laid out close at hand
● Keep all small parts(screws,fixings ect) in a bowl so they do not get lost.
●
Please dispose of all packaging materials and plastic bags safely - keep out of reach
from children and babies to avoid risk of suffocation.
● Keep children away from the assemble area.
● Do not attempt to assemble the Canopy in windy or wet conditions.
● Do not touch overhead power cables with the aluminium profiles.
● Do not attempt to assemble this Canopy if you are tired,
of drugs or alcohol, or if you are prone to dizzy spells.
●
under the influence