Instructions containing a warning within this manual are marked with a symbol. Keep out of reach of children. Do not use with children in immediate area. IMPORTANT: Jenlis, Inc is not responsible for equipment damage or failure, ® losses, injury or death resulting from failure to follow safety precautions, misuse or abuse of equipment.
Notes: Assembly & Instructions Tools Required: • #3 Phillips Screwdriver • 7/16” Wrench Step 1 Insert 4 of the 1.2” Bolts (J) into the four outermost holes of one of the triangular Support Brackets (D) making sure to slide the bolts through the domed side, then place the bracket on a flat work surface with the screw heads down.
Notes: Assembly & Instructions (con’t) Step 4 Next insert a 1.2” bolt (J) into the hole at the base of the Support Bracket and a 1.5” bolt (I) through the hole with the Weed Deflector (F), then secure each with a washer and nut. Tip the assembly upright and tighten all fasteners securely using a Phillips screwdriver and 7/16”...
Notes: Blade Sharpening Instructions WARNING Step 1 Always wear cut resistant gloves when handling the Weed Razer. Step 2 Stand the assembled Weed Razer up and grip the handle in one hand, or rest the handle of the Weed Razer against a wall or building. Step 3 Fig.
Notes: Safety Instructions WARNING 1. Always wear cut resistant gloves when handling the Weed Razer, especially during and after removal of the blade covers. 2. The Weed Razer is to be operated by hand only. Do not pull the Weed Razer behind a boat or any other machine driven equipment.
The manufacturer agrees, at its option during the warranty period, to repair any defect in material or workmanship, or to furnish a repaired or refurbished product without charge. All warranty claims must be sent to Jenlis, at the customer’s expense. Return shipping will be pre-paid. All returns must be pre-approved. Please visit www.weedrazer.com/warranty for an RMA number prior to returning product.