Advertisement
Quick Links
The EnGenius Antenna Splitter allows the EnGenius base unit's
signal to be directed to two different areas. Splitting the signal will
significantly reduce the potential coverage, when compared to not
splitting the signal, but is ideal when obstacles obstruct the signal
and weaken or prevent coverage to another area.
Item
Item
Isolation
Isolation
Insertion Loss
Insertion Loss
MAX Power Input
MAX Power Input
1. Connect the Reverse Thread TNC Connector (Port 3) to the
included 3 meter coaxial cable, and then attach the other end of
this cable to the base unit's antenna connector.
Note: EnGenius base unit's antenna connector uses a reverse
thread TNC adapter and is turned clockwise to remove.
2.Connect the Reverse Thread TNC Connector (Port 1 or Port 2) to
the Antenna Kit, SN-ULTRA-AK10 or SN-ULTRA-AK20.
Port 3
Connected to
base unit
W I R E L E S S S O L U T I O N P R OV I D E R
SN-ULTRA-AS
Antenna Splitter Quick Reference
Technical Specifications
Installation Procedure
Electrical Specifications
Electrical Specifications
> 14dB
> 14dB
< -4.5dB
< -4.5dB
= 4W
= 4W
Port 1
Connected to
antenna
Port 2
Connected to
antenna
Advertisement
Summary of Contents for EnGenius Antenna Splitter
-
Page 1: Technical Specifications
Antenna Splitter Quick Reference The EnGenius Antenna Splitter allows the EnGenius base unit's signal to be directed to two different areas. Splitting the signal will significantly reduce the potential coverage, when compared to not splitting the signal, but is ideal when obstacles obstruct the signal and weaken or prevent coverage to another area. -
Page 2: Limited Warranty
Warranty Service To get warranty service on this product, you must provide proof of the date of purchase. Call EnGenius Customer Service at 714-432-8668 (U.S.) or 905-940-8181 (Canada) for a Return Materials Authorization (RMA) number and the address of the nearest authorized service location.