Download Print this page

RAMTONS RM/554 User'smanual

Hot and cold water dispenser

Advertisement

Quick Links

 KEEP THIS MANUAL IN GOOD CONDITION
 PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE MACHINE
HOT AND COLD WATER DISPENSER
MODEL: RM/554
USER'S MANUAL
RM/555
RM/419

Advertisement

loading

Summary of Contents for RAMTONS RM/554

  • Page 1 USER’S MANUAL HOT AND COLD WATER DISPENSER MODEL: RM/554 RM/555 RM/419  KEEP THIS MANUAL IN GOOD CONDITION  PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE MACHINE...
  • Page 2: Wiring Diagram

    PARTS AND FEATURES WIRING DIAGRAM...
  • Page 3 Important Safety Instructions WARNING To reduce the risk of fire, electrical shock or injury when using your appliance, please follow these basic instructions.  Read all instructions before using the water dispenser.  Never clean parts with flammable fluids. The fumes can create a fire hazard or explosion.
  • Page 4: Operation

     Unplug the dispenser from the electrical outlet. Proceed to drain the water from the faucets one at a time until no more water remains. (Note: To facilitate this operation, use a large container).  Then, drain any water left in the tanks by opening the backside hot water drainage hole cap, until all water drains completely.
  • Page 5: Maintenance

    TAKING DISPENSER OUT OR SERVICE  If the water dispenser will not be used for a long period of time, unplug the power supply cord.  Turn off the hot water.  Drain the water through the faucets.  Drain the water from tanks by drainage hole from the back of the dispenser. CAUTION ...
  • Page 6: Troubleshooting Guide

     If power supply cord on this device is damaged, it must be replaced with a special power supply cord that is obtainable at Service Center of our company TROUBLE SHOOTING GUIDE You can solve many common water dispenser problems easily, saving you the cost of a possible service call.
  • Page 7 In order to ensure the water dispenser with enough stability, users should follow below instructions to fix the unit: 1. Remove one of the body rear’s screw(upper right corner or upper left corner)(Picture 1) 2. Install a bracket where you have removed the screw already, fix the bracket tightening the removed screw on the right location(Picture 2) 3.

This manual is also suitable for:

Rm/555Rm/419