Download Print this page

Water Creation EMPIRE30 Installation Manual

Wash stand

Advertisement

Quick Links

MODEL: EMPIRE30 / EMBASSY30
WASH STAND INSTALLATION GUIDE

Advertisement

loading

Summary of Contents for Water Creation EMPIRE30

  • Page 1 MODEL: EMPIRE30 / EMBASSY30 WASH STAND INSTALLATION GUIDE...
  • Page 2: Before You Begin

    MODEL: EMPIRE30 / EMBASSY30 Recommended Tools: - Drill - Level - Hammer - Pencil - Silicone - Phillips head screwdriver - Safety Glasses ** IMPORTANT ** BEFORE YOU BEGIN 1) Professional installation by two-person crew is required for this fixture...
  • Page 3: Installation Step

    MODEL: EMPIRE30 / EMBASSY30 INSTALLATION STEP 1) Assemble the back support as shown. Tighten set screw on the escutcheon and 3-way joint. 2) Assemble support legs as shown. Use a level to ensure the top 5) Thread the floor screws with foot flange and screw it into floor.
  • Page 4 MODEL: EMPIRE30 / EMBASSY30 MARBLE TOP INSTALLATION Storage: 1. Keep marble top in it’s box until installation 2: Store box vertically in a place safe from being hit or knocked over 3. Do not stack anything on top of the box Opening Box: 1.
  • Page 5: Installation

    MODEL: EMPIRE30 / EMBASSY30 MARBLE TOP INSTALLATION Installation: 1. Always use a two man crew, a single person crew is much more likley to cause damage 2: Apply sealant to secure marble top on washstand...

This manual is also suitable for:

Embassy30