Advertisement
Quick Links
Installation Guide for CMT series Ceiling Plates.
CMT-P
CMT-TP
SAFETY INSTRUCTIONS
1. Only entrust loudspeaker mounting equipment to experienced professionals. Also strictly follow the provided safety
instructions. Improperly installed mounting equipment may result in property damage, personal injury and/or liability
for the installing contractor.
2. Always use safety cables! This will prevent equipment from falling during/after setup and while exploiting.
3. Always check if the wall surface is structurally strong enough to support load. Make sure the wall and/or ceiling
structure allows to hold the weight of the speaker including its bracket.
4. Only use appropriate fasteners.
5. Always make sure to securely use and tighten/lock all mounting bolts provided. Loose bolts may become unscrewed
over time due to vibration which could potentially create a safety hazard when not tightened securely.
www.mnmounting.com
info@mnmounting.com
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Installation Guide
CMT series
CMT-CH
CMT-T50
Advertisement
Related Manuals for Mounting Solutions CMT Series
Summary of Contents for Mounting Solutions CMT Series
- Page 1 Installation Guide CMT series Installation Guide for CMT series Ceiling Plates. CMT-P CMT-CH CMT-TP CMT-T50 SAFETY INSTRUCTIONS 1. Only entrust loudspeaker mounting equipment to experienced professionals. Also strictly follow the provided safety instructions. Improperly installed mounting equipment may result in property damage, personal injury and/or liability for the installing contractor.
- Page 2 Installation Guide CMT series CMT-D fixed CMT-D telescopic www.mnmounting.com info@mnmounting.com 2 Merezhna str., Bila Tserkva, Kyiv region, 09100, Ukraine...
-
Page 3: Installation Instructions
Installation Guide CMT series Installation Instructions: CMT-P 2. Install (screw) the distance tubes 1. Screw the bracket to the ceiling by that bracket. And tighten the fixing using all (4) screw. bolts to lock. CMT-T50 2. Install (screw) the distance tubes 1. - Page 4 Installation Guide CMT series CMT-TP 1. Screw the bracket to the ceiling 2. Install (screw) the distance tubes by using all (4) screw. Use for uneven that bracket. And tighten the fixing ceilings. bolts to lock. 3. Adjust the tilt distance tubes of the bracket and tighten the fixing bolts to lock in the position of your need.
- Page 5 Installation Guide CMT series CMT-CH 1. Insert the channel retainer nut into 2. Screw the bracket into the channel the U-shaped profile and turn it 90° retainer nuts to the U-profile by using until it stops. all (2) screw. 3. Install (screw) the distance tubes that bracket.
- Page 6 Installation Guide CMT series CMT-D telescopic When using a telescopic tube, set the position as you want and fix it with bolts. www.mnmounting.com info@mnmounting.com 2 Merezhna str., Bila Tserkva, Kyiv region, 09100, Ukraine...