Download Print this page

Cable Electronics Celabs Distribution Hub and Receiver Installation & Operation Instructions

Cat 5 distribution hub and receiver

Advertisement

Quick Links

CE labs can support many areas of your audio and
video distribution needs.
We manufacture RF modulators, RF amplifiers, HD
distribution amplifiers, and cables of all types.
See our full product line at www.celabs.net.
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in material and
workmanship, under normal use and service, for a period of one year from the
purchase by the original purchaser. If this product is defective or malfunctions,
Cable Electronics will replace or repair this unit (at their option) within a reasonable
time. No expressed or implied warranty is made for any dects caused by immersion
or exposre to liquids, abuse, neglect, improper operation of unit, excess wear and
tear and defects resulting from unauthorized disassembly and or modification.
Cable Electronics, Inc.
3209 Wood Drive
Garland, Texas 75041
(469)429-9200
Fax (469)429-9205
Document: CAT5_INFO_B.cdr
http://www.celabs.net
Rev. B
Component Video/Audio
HDTV Distribution Amplifier
Cat 5 Distribution Hub
And Receiver
Distribute a High Definition Video/Audio
Source to multiple locations over extended
distances using economical Cat 5 cable.
Cable Electronics, Inc.
3209 Wood Drive
Garland, Texas 75041
(469)429-9200
Fax (469)429-9205

Advertisement

loading

Summary of Contents for Cable Electronics Celabs Distribution Hub and Receiver

  • Page 1 See our full product line at www.celabs.net. WARRANTY Cable Electronics, Inc. warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from the purchase by the original purchaser. If this product is defective or malfunctions, Cable Electronics will replace or repair this unit (at their option) within a reasonable time.
  • Page 2 Installation / Operation Instructions Unpack the amplifier and power supply from each box. Place the transmitter amplifier in a dry location, usually behind the shelf where the source is located. Connect the source device outputs to the appropriate input jacks on the CAT5TX. The loop out jacks can be used to feed a local monitor or a second transmitter if installed.

This manual is also suitable for:

Ce labs cat5rxCe labs cat5tx