Download Print this page

A-Neu Video ANI-605XPLBD Instruction Manual

Transmitter & receiver, hdmi to cat5e/6/7 extender

Advertisement

Quick Links

ANI-605XPLBD
Transmitter & Receiver
HDMI to CAT5e/6/7 Extender
ANI-605XPLBDT
ANI-605XPLBDR
A-NeuVideo.com
Frisco, Texas 75036
AUDIO / VIDEO MANUFACTURER

Advertisement

loading

Summary of Contents for A-Neu Video ANI-605XPLBD

  • Page 1 ANI-605XPLBD Transmitter & Receiver HDMI to CAT5e/6/7 Extender ANI-605XPLBDT ANI-605XPLBDR A-NeuVideo.com Frisco, Texas 75036 AUDIO / VIDEO MANUFACTURER...
  • Page 2 SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.
  • Page 3: Table Of Contents

    INTRODUCTION • Do not attach the power supply cabling to building surfaces. The ANI-605XPLBD HDBaseT -Lite is a HDMI over single • Use only the supplied power supply unit (PSU). Do not use the ™...
  • Page 4: Features

    NEUVIDEO FEATURES & SPECIFICATIONS FEATURES • Compatible with HDCP and DVI • Supports HDMI 3D and 4K2K features • Supports HDBaseT -Lite Technology ™ • Supports HD resolutions up to 1080p@60Hz/36bit • Supports distances up to ~197 ft/60M with a CAT5e/6/7 cable •...
  • Page 5: Operation Controls & Functions

    NEUVIDEO OPERATION CONTROLS & FUNCTIONS Transmitter Front & BACK Panels DC 24V: Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet. Only (1) side of the device requires a power supply when both the Transmitter and Receiver are using the PoC function. LINK LED: This LED will illuminate when the devices are connected with a CAT5e/6/7 cable from the Receiver side.
  • Page 6: Ir Pin Assignment

    NEUVIDEO OPERATION CONTROLS & FUNCTIONS IR Pin Assignment IR Blaster Power 5V IR Blaster Signal IR Receiver IR Signal Power 5V Grounding D-Sub 9-Pin Definitions DEFINITIONS DEFINITIONS TxD/RxD RxD/TxD...
  • Page 7: Connection Diagram

    NEUVIDEO CONNECTION DIAGRAM CONNECTION DIAGRAM...
  • Page 8 NEUVIDEO TERMS & CONDITIONS OF USE PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER A-NeuVideo, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions.

This manual is also suitable for:

Ani-605xplbdtAni-605xplbdr