Advertisement
Quick Links
Quality Plumbing Products Since 1896
Mount Washer
Mount Nut
Hold inlet adapters with
wrench when tightening
water supply line nuts
Hose Quick Connect
Spray Hose
PRODUCT SPECS AND STANDARDS:
DESCRIPTION:
• Brass under body with copper supplies
• Brass supply connection adapters with 1/2" IPS
threads
• One (1-3/8" min to 1-5/8" max DIA.) Hole
OPERATION:
• Requires less than 5LB force to operate valve
• Flow adjustment: 90° turn from full hot to full cold
• 1.8 GPM (6.8 L/min)Aerator
CARTRIDGE:
• 25mm ceramic disc cartridge
STANDARDS:
• IAPMO/UPC Certified:
• ASME A112.18.1-2012/CSA B 125.1-12
• NSF/ANSI 61-2012
• NSF/ANSI 372-2011 (Lead Free)
WARRANTY:
• 100 Year drip-free warranty
• Product to be free of defects in material or
workmanship
1-800-944-9292
www.wolverinebrass.com
2951 E HWY 501
Conway, SC
Spray Wand
Deck Plate
29526-9515
ARCHITEC™
Pull Down Kitchen Faucet
81610 - Chrome
81611 - Brushed Nickel
81612 - Matte Black
INSTALLATION INSTRUCTIONS:
1.
Assemble optional deck plate to faucet for three hole
sink installations. Optional deck plate is not required
for single hole sink installations
2.
Position faucet on sink
3.
From underside of sink, assemble "Mount Washer &
Nut"
4.
Assemble "Braided Spray Hose" to "Hose Quick
Connect" CAUTION: Make sure hose is properly
engaged and secure in faucet hose quick connect
5.
Assemble hose weight to spray hose
6.
Assemble water supply lines to faucet CAUTION: Use
wrench or pliers to hold faucet inlet adapters when
tightening supply line nuts to prevent twisting copper
tubing or damaging solder joints
7.
Remove spray wand from faucet and flush water
through faucet to remove any line trash
8.
Assemble spray wand and run water through faucet
while checking for leaks at all connections
Single Hole Installation
Three Hole Installation
Part# 78236 updated 06/2018 Rev. 0
Advertisement
Summary of Contents for Wolverine Brass ARCHITEC 81610
- Page 1 ARCHITEC™ Pull Down Kitchen Faucet Quality Plumbing Products Since 1896 81610 - Chrome 81611 - Brushed Nickel 81612 - Matte Black INSTALLATION INSTRUCTIONS: Spray Wand Assemble optional deck plate to faucet for three hole sink installations. Optional deck plate is not required for single hole sink installations Position faucet on sink From underside of sink, assemble “Mount Washer &...
- Page 2 ARCHITEC™ Pull Down Kitchen Faucet Quality Plumbing Products Since 1896 Cartridge Valve Replacement INSTALLATION INSTRUCTIONS: Figure 1 Shut off hot and cold water supply to faucet Turn handle to full on/mixed flow position (figure 1) Using a knife point or straight pin, remove rubber cap nut plug (figure 2) Full On Mixed Flow...
- Page 3 This warranty covers replacement of cartridges, parts and finish only. It does not include labor charges and/or damage incurred during installation. Wolverine Brass will provide free of charge all parts and cartridges found to be covered under the warranty; any part that proves defective in material and/or workmanship under normal installation, use and service.