Advertisement
Quick Links
Bedienungsanleitung
USER MANUAL FOR AUTOMATIC FOR RADIAL AND
TANGENTIAL EXTRACTORS 12/220V
Buttons functions:
-Time-/Time+
-Speed-/Speed+
-Direction
-Memory
-Stop
-Start
Increases and decreases work time of the extractor
Increases and decreases work speed of the extractor
Sets the spinning direction of the extractor
Saves the set time and speed of the extractor
Stops the extractor
Starts the extractor
Honigschleuder
112029
04.03.2021
Advertisement
Summary of Contents for FAIE FD112029
- Page 1 Honigschleuder 112029 04.03.2021 Bedienungsanleitung USER MANUAL FOR AUTOMATIC FOR RADIAL AND TANGENTIAL EXTRACTORS 12/220V Buttons functions: -Time-/Time+ Increases and decreases work time of the extractor -Speed-/Speed+ Increases and decreases work speed of the extractor -Direction Sets the spinning direction of the extractor -Memory Saves the set time and speed of the extractor -Stop...
- Page 2 Using buttons Speed-/Speed+ you set the desired work speed of the extracotr ( from 10% to 100%). When you are finished with setting the time and speed of the extractor, by pressing button Start, you start the extractor, and set work time is shown on the screen, begining to count down from the set value to zero. Direction of spinning of the extractor can be changed by pressing button Direction, but only when the extractor comes to a full stop.
- Page 3 Before staring to work with the extractor, make sure that the motor, on the bottom of the extractor, is connected as shown on the picture: Also make sutr that the micro switch is connected with the automatic, as shown on the picture: NOTE: Avoid working on the agregate.