Detailed Procedure to Copy Data From USB Drive to The TV
To copy the data from the USB Drive to the TV:
1. Turn on the TV.
2. Insert the USB Drive with the copied data into the USB connector.
3.Using the Remote Control, enter the appropriated password when the ―Input Password‖ Menu appears.
• For Board replacement
• For Hotel :
4851
(The data will not be deleted and it can be used for other TVs)
if the "A" board is replaced.
Enter
2771
Enter
4851
if copying Hotel data.
The data will be copied from the USB Drive to the TV.
4. Remove the USB Drive from the TV.
5. Turn off the TV set.
Note:
1. Depending on the A board's failure, the data copy procedure may not work after replacing the board.
2. Data should only be copied to TVs with the same model number.
:2771
(The data on the USB Drive is deleted after it has been copied to the TV)
Slide 73
Slide 73
Need help?
Do you have a question about the TC-P55VT60 and is the answer not in the manual?