Panasonic TC-P55VT60 Technical Troubleshooting Manual page 69

Quick Procedure to Copy the TV's Data to a USB Drive.
The following data can be copied from the TV to an USB Drive:
•
User settings data (Including hotel mode setting data).
•
Channel scan data.
•
Adjustment and factory preset data (A board replacement only)
This will help to restore the customer's settings when the A board is replaced for a non-shutdown issue.
This also allows for the hotel data on a TV to be copied to several TVs.
Procedure to copy the data from the TV to the USB.
1. -A start-up .pwd file has to be created on an USB Drive so the TV data can be saved on the USB
Drive. (Do this on a PC or Laptop).
a) – Create a file named "board_replace‖ if transferring the data from a TV which A board is being
replaced.
b) – Create a file named ―hotel‖ to copy the hotel data.
-Originally, the file is created as ―.txt‖ and then converted to ―.pwd‖. (Different methods can be used
2.
to create .txt files and convert them to .pwd).
3. - The USB Drive has to then be connected to the TV.
4. - A predetermined password has to be entered, depending on the type of data that will be copied on
the USB Drive:
•
Enter 2770 for A board replacement.
•
Enter 4850 for Hotel data.
5. After the data from the TV is copied to the USB Drive, a new folder is created on the USB Drive:
•
Board_replace
•
Hotel.
6. The data from the USB Drive can now be copied to a TV of the same model.
TV Data Copy to USB Drive
Slide 69 Slide 69