Fan SOS (11 Blinks)
Jumper
FAN CONNECTOR
Follow this procedure to test the fans
one at a time. Unplug the fan's
connector and place a jumper wire
across the 2 none red wires of the
female connector
(See the fan
connector
image).
Is the fan error
No
message shown
Yes
Fans Error Message
on the right
displayed on
the screen?
Repeat the same test for all the fans, if the fan error message
is still displayed after testing all the fans, replace the A board.
Replace the
If the message is no longer displayed, replace the fan
fan
disconnected when this happened.
Slide
Need help?
Do you have a question about the TC-P55VT60 and is the answer not in the manual?