Advertisement
Quick Links
ITEM NO.: IP07M Chainable IP Extender with Power over Coax/Two Wire
IP07M IP Extender with power solution is designed to send and extend Ethernet network with
power can be established using existing cables up to 500M. You can use a coax cable or
two-wire cable (UTP cable, coax cable, telephone line, antenna cable, or bell wire). It is
perfect solution to replace your analog camera with IP camera but using existing cable.
IP07M could be a transmitter or receiver unit, with the special feature allow doing
chainable/series/star connection up to 4 IP cameras. It is perfect solution for extended
distance data and power transmission for warehouses, parking lots, campuses, casinos and
many more.
IP07M Chainable IP Extender with Power over Coax/Two Wire
Extend IP camera signal with power over existing coaxial cable or any two wire
cable.
Extend Ethernet or any TCP/IP devices up to 1.5Km.
Provide IP camera power up to DC12V 1Amp (12W), distance up to 500M.
Support chainable/ series/star connection up to 4 IP cameras.
Support 10/100BASE-T transmission rate.
When doing one camera to IP with Power installation, power source could select
either from transmitter or receiver.
When doing series or star installation to send IP with power, each IP07M need
external power adapter.
Perfect to upgrade the analog camera system into IP CCTV application.
IP07M Power Source Option Model:
DC48V 40W power adapter: SWP480830
DC56V 70W power adapter: SWP551260
Installation View:
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit #713, Toronto, Ontario,Canada M2H1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV
IP CABLING TRANSMISSION
1
Advertisement
Summary of Contents for FORESIGHT IP07M
- Page 1 ITEM NO.: IP07M Chainable IP Extender with Power over Coax/Two Wire IP07M IP Extender with power solution is designed to send and extend Ethernet network with power can be established using existing cables up to 500M. You can use a coax cable or two-wire cable (UTP cable, coax cable, telephone line, antenna cable, or bell wire).
-
Page 2: Connection Diagram
Connection Diagram: One Camera Point to Point Application Four IP camera Series Application Four IP camera Star configure Application Four IP camera Circle configure Application FORESIGHT CCTV INC. | 5863 Leslie Street, Unit #713, Toronto, Ontario,Canada M2H1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV... -
Page 3: Led Indication
※ Recommend external power adapter must use DC 48～56V . LED Indication： LED Indication Status Function Green Power ON/OFF Blue Under Linking Linking failed RJ45 Green Flash Under Linking (Green) Panel View: FORESIGHT CCTV INC. | 5863 Leslie Street, Unit #713, Toronto, Ontario,Canada M2H1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV... - Page 4 Use SETTING button to setup a group: When two IP07M need to create a group, please follow the following steps: 1. Connect two IP07M first then press the SETTING button 5~8 seconds of first unit of IP07M, the blue/green LED will be flashing.
- Page 5 Joined the group, the maximum unit of IP07M total 5 units: When 3rd, 4th, 5th IP07M need to join the same group, please follow the following steps: 1. Connect the 3/4/5th of IP07M first then press SETTING button 1~3 seconds of the unit, the blue/green LED will be flashing.
-
Page 6: Specifications
IP07MK: IP07M x 2 units, Screw pack x 1 bag, Rubber Pad x 1 bag IP07MK-DC48V: IP07M x 2 units, DC48V power adapter x 1, Screw pack x 2, Rubber Pad x 2 bag IP07MK-DC56V: IP07M x 2 units, DC56V power adapter x 1, Screw pack x 2, Rubber Pad x 2 bag...