GATEMASTER SUPERLOCK QUICK EXIT Quick Start Manual

SUPERLOCK QUICK EXIT
The quick exit push pad is designed to facilitate rapid exit through gates.
Stainless steel adjustable latchbolt which springs 22mm into the gate post.
Precise fitting on site.
Supplied with bolt guide plate and gate post strike plate.
Quick exit/key access or quick exit digital lock combinations available.
A security shroud is also available to prevent access to the push pad from
the outside.
C _ _ _ _ _
PRODUCT DETAILS
Product code: Description:
Key access on one side, push pad on the other
BQK1030L Left Hand for 10 - 30mm gate frames
BQK1030R
Right Hand for 10 - 30mm gate frames
BQK4060L Left Hand for 40 - 60mm gate frames
BQK4060R Right Hand for 40 - 60mm gate frames
Digital keypad access on one side, push pad on the other
BQDG1030L Left Hand for 10 - 30mm gate frames
BQDG1030R Right Hand for 10 - 30mm gate frames
BQDG4060L Left Hand for 40 - 60mm gate frames
BQDG4060R Right Hand for 40 - 60mm gate frames
Marine grade: Salt spray tested for 1000 hours.
Latchbolts: Adjustable, latchbolt springs 22mm.
INSTALLATION
1. Drill 2 x 9mm holes at 140mm centres for fixing bolts provided.
2. Drill 18mm clearance hole for the latchbolt at 60mm centres up
from the bottom fixing hole.
3. Hold the lock against the back of the box section and screw on the latchbolt
through the 18mm hole.
4. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of
the latchbolt.
5. Fix lock in place using the stainless steel bolt support plate and the
countersunk screws provided. Ensure the latchbolt moves freely.
6. Fix stike plate by either welding or screw fixing onto the gate post
7. MAINTENANCE Every 6 months, lubricate the latchbolt with light oil.
Annually, dismantle the lock and spray mechanism with light oil.
VISIT SIGNETLOCKS.CO.UK FOR MORE INFORMATION
© Copyright Gatemaster 2016
(Digital locks only)
www.signetlocks.co.uk
SPECIFICATION
194
SHEET
BQK right
hand shown
BQDG right hand
shown
+44 (0)1243 552066