Select Writing; Convert Writing To Text - ETen G500+ User Manual

If you want to edit or format writing, you must select it first.
1. Tap and hold the stylus next to the text you want to select until the
insertion point appears.
2. Without lifting, drag the stylus across the text you want to select.
If you accidentally write on the screen, tap Menu, then Undo and try
again. You can also select text by tapping Menu and then Draw to deselect it
and then dragging the stylus across the screen.
You can cut, copy, and paste written text in the same way you work with
typed text: tap and hold the selected words and then tap an editing command
on the pop-up menu, or tap the command on the Menu menu.

Convert Writing to Text

Tap Menu, Tools, and then Recognize. If you want to convert only
certain words, select them before tapping Recognize on the Tools menu (or
tap and hold the selected words and then tap Recognize on the pop-up menu).
If a word is not recognized, it is left as writing.
Select the text you want to convert and tap Recognize on the pop-up
menu.
The writing is turned into text.
3-18

Select Writing