Tap
, Settings, the Connections tab, and then CSD Type.
You must first apply for Circuit-Switched Data (CSD) service from your
telecom company before you can use this function. In short, this function is
similar to the modem dial-up in a personal computer. By simulating the
Pocket PC as a modem and connecting through the built-in GSM device, you
can use the Pocket PC to access the web.
Connecting with a Personal Computer
For more information, refer to "Microsoft ActiveSync" section.
CSD Type
This figure is for reference only.
The parameters shown in the screen
will be based on the settings
provided by your telecom
company. The charge rate is
regulated by your telecom
company.
Connections 7-13
Need help?
Do you have a question about the G500+ and is the answer not in the manual?