Advertisement
Quick Links
2 x 60" Aluminum Infinity Glow™ LED strip (Sides)
2 x 36" Aluminum Infinity Glow™ LED strip (Front & Rear)
1 x 10ft Extension cable (Rear only)
3 x
6ft
Extension cable
10 x Aluminum mounting brackets
10 x
Self Tapping
screws
8 Self Tapping
x
Screws
1. Before installing please connect all
2. Once you have connected all strips. With an external
12V power source, connect the Red wire (power) and black
wire (ground) and fully test and make sure all aluminum
1. Make sure you properly clean the mounting area
ATTENTION
Please follow the guidelines
below before installing your
to the 4
connector driver included
strips are working properly.
with rubbing alcohol or non-residue degreaser.
2. Allow to air dry for and give a final
wipe down with a clean microfiber.
kit.
aluminum
in your kit
LED strips
Advertisement
Related Manuals for Lit Lightz INFINITY GLOW UNDERGLOW Series
Summary of Contents for Lit Lightz INFINITY GLOW UNDERGLOW Series
- Page 1 2 x 60" Aluminum Infinity Glow™ LED strip (Sides) 2 x 36" Aluminum Infinity Glow™ LED strip (Front & Rear) 1 x 10ft Extension cable (Rear only) Extension cable 10 x Aluminum mounting brackets 10 x Self Tapping screws 8 Self Tapping Screws ATTENTION Please follow the guidelines...
- Page 2 You have 2 options to mount the Infinity Glow™ underglow kit. These options are general guidelines. Every car or truck is different. Please make the necessary adjustments if needed. - Start by measuring the mounting area. Once you have the area aligned, mount the brackets with the small screws provided.
- Page 3 Electricity could cause injury or death. Professional installation is recommended. Lit Lightz will not be held responsible for any damage or cost whether direct or indirect incurred by the consumer in relation to any Lit Lightz Product. Lit Lightz reserves the right...