Download Print this page
JADO Glance 031/010 Series Installation Instructions

JADO Glance 031/010 Series Installation Instructions

Wall mounted accessories

Advertisement

Quick Links

3
INSTALL TOWEL BAR OR GLASS SHELF
See detail for the center to center dimension of TOWEL BARS (1) and
GLASS SHELF (7). For installation of the MOUNTING PLATE (3) see step 1.
Note: The center line of MOUNTING PLATES (3) must be level.
Install WALL MOUNTED ACCESSORY (1) onto installed MOUNTING
PLATE (3). Push WALL MOUNTED ACCESSORY (1) flush against
finished wall and tighten SET SCREW (5) with HEX WRENCH (6)
supplied with accessory.
C/L
OPTIONAL TO
FINISHED FLOOR
(50" TO 60")
USE MOUNTING
PLATE AS TEMPLATE
4
HELPFUL HINTS FOR CLEANING AND MAINTENANCE
The solid brass product you have just purchased has been designed to give you years of beauty and service. It is
important to bring to your attention proper care and maintenance procedures, which will ensure its lasting beauty.
First and foremost, it is important (as it is with any fine piece of jewelry or furniture) that the product be wiped clean and
dry with a soft damp cloth after every use.
Second, under no circumstances should an abrasive cleaner or combination cleaner/polish be used on JADO products.
The abrasive nature of such products will eventually destroy the finish and void the warranty.
In the event of stubborn blemishes shown on the finish, we recommend use of Windex window cleaner with a soft cloth,
but we do not recommend it be used on an everyday basis.
It is important to note that it is normal to expect signs of usage over time.
Thank you for selecting JADO for your home.
TO THE PURCHASER OF JADO BRASS PRODUCTS
Attention installer:
Please leave This Pamphlet for The Owner
JADO Bathroom & Hardware Manufacturing Corp. provides the following warranties only to the first residential owner of our products.
FINISHES
JADO warrants this product to be free from defects in materials or workmanship for as long as the original consumer purchaser
owns their home.
NOTICE: JADO products conform to industry
JADO will provide, free of charge, at it's sole option, replacement part(s) or product (or if no longer available, a comparable
requirements of water conservation under the
product) to replace those which have proven defective in materials or workmanship.
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to JADO for all limited
ASTM / ANSI
A112.18.1M-1994
plumbing code.
warranty claims. This limited warranty is non transferable. It does not apply in the event of product damage due to the use of other than
Lavatory, bidet, wet bar and kitchen faucet sets
genuine JADO replacement parts, installation error, abuse, misuse, or improper care and maintenance (whether performed by
a plumber, contractor, service provider or member of the purchaser's household). The limited warranty excludes damage due to aggressive
have a maximum flow rate of 2.2GPM.
Shower
air or water conditions, or harsh or abrasive cleaners and/or materials. This limited warranty excludes all industrial, commercial and business
heads, hand showers and body sprays have a
usage, whose purchasers are hereby extended a two year limited warranty (with the exception of solenoid valves and other electronic
components which carry a one year limited warranty) applying to all other terms of this limited warranty except duration. This limited warranty
maximum flow rate of 2.5GPM.
does not cover labor charges incurred and/or damages sustained in installation, repair or replacement, nor incidental or consequential
damages, all of which are expressly disclaimed. This limited warranty is applicable only to JADO faucets manufactured after June 1, 1996
and installed in the United States and/or Canada.
The state of California has mandated under Proposition #65 that
This limited warranty gives the original consumer purchaser of an JADO faucet specific legal rights which may vary from state to
manufactures of products, including faucets which come into
state or from province to province. This limited warranty does not cover any liability for consequential or incidental damages, all of which
contact with potable water, must warn the consumer if the product
are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including
contains materials listed by the state as a carcinogen or
those of merchantability or fitness for an intended purpose. In some states or provinces the exclusion or limitation of incidental or consequential
reproductive toxin. Lead, which is contained in all brass faucets in
damages is not allowed, so those exclusions may not apply to you.
limited amounts appears on the State's list.
POLISHED BRASS AND CUSTOM FINISH WARRANTY: A 1 YEAR LIMITED FINISH WARRANTY from date of purchase is provided to the
first residential owner against defects in materials and workmanship. Due to the ever-changing finish of Patina products, the finish warranty
Preliminary industry tests have indicated that users of faucets
is excluded. Warranty shall not include problems related to the installation of the product.
made from brass face no significant danger, however,
California Proposition #65 requires that we provide you with the
MECHANICS
following notice:
MECHANICAL WARRANTY: A LIFETIME LIMITED WARRANTY is provided to the first residential owner on parts to be free from failure
related to defects in materials and workmanship but not installation.
Warning: This product contains an element
CONDITIONS TO WARRANTIES
JADO Bathroom & Hardware Manufacturing Corp. places the following conditions on its finish and mechanical warranties to the first residential owner only.
known to the State of California to cause cancer
JADO finish and mechanical warranties are limited to products correctly installed and used in a residential environment.
of reproductive harm.
JADO warranties will not assume liability for damage due to abuse, mishandling, incorrect installation, improper maintenance, or deterioration
due to normal use.
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products.
In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased
JADO BATHROOM AND HARDWARE MFG. CORP.
along with proof of purchase.
7845 East Paradise Lane
JADO's obligation under the warranty shall be limited to the repair or exchange of any product which has been determined by JADO to be
defective after appropriate examination.
Scottsdale, AZ 85260
Glass Shelf
031/612 (23-5/8")
C/L
Towel Bar
C/L
031/460 (18")
031/600 (24")
C/L
031/800 (30")
LEVEL
4
2
1
3
5
6
FAUCET LIFETIME FUNCTION AND FINISH LIMITED WARRANTY
C/L
7
P r o d u c t s
Glance
Product Numbers
Robe Hook
O31/O1O/...
Towel Bar 18"
O31/46O/...
Towel Bar 24"
O31/6OO/...
Towel Bar 3O"
O31/8OO/...
Tissue Holder
O31/145/...
Spare Tissue Holder
O31/16O/...
Tumbler
O31/141/...
Soap Dish
O31/132/...
Glass Shelf
O31/612/...
Lotion Dispenser
O31/144/...
JADO USA
7845 East Paradise Lane
Scottsdale, AZ 8526O
Phone:(8OO) 227-2734
Fax: (8OO) 552-JADO(5236)
www.jadousa.com
1 0 9 6 4 9
© J A D O U S A 2 0 0 3
Wall Mounted Accessories
Installation Instructions
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
L u x u r y
F a u c e t s
a n d
A c c e s s o r i e s
1 0 9 6 4 9

Advertisement

loading

Summary of Contents for JADO Glance 031/010 Series

  • Page 1 JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products. In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased JADO BATHROOM AND HARDWARE MFG.
  • Page 2 TOOLS REQUIRED INSTALL WALL BRACKET Phillips Screwdriver The wall mounted accessories (1) work best if secured to a wall stud or cross brace within the wall, using the SCREWS (2) supplied. Drill Tape Level Measure Regular Screwdriver If the WALL MOUNTED ACCESSORIES (1) are to be installed on a tile or plaster wall the ANCHORS (4) and SCREWS (2) should be used. ROUGHING-IN Determine desired height and location (optional) and mark a center line.

This manual is also suitable for:

Glance 031/460 seriesGlance 031/600 seriesGlance 031/800 seriesGlance 031/145 seriesGlance 031/160 seriesGlance 031/141 series ... Show all