Office Star Products Space Seating 13-V22N1WA Operating Instructions

13-V22N1WA / 13-V44N1WA / 13-V66N1WA
FAUTEUIL DE LUXE avec DOSSIER VeraFlex™
ÉTAPE 1 ÉTAPE 2
12
2
X5 8
1
7R
ÉTAPE 4 ÉTAPE 5
12
10
X3
4
11
6
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et
vérifier les quantités des pièces.
ÉTAPE 1 Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu'à ce que les roulettes (2) s'encliquettent.
ÉTAPE 2 Fixez les bras (7L & 7R) au coussin du siège (5) en utilisant trois vis pour les bras (9) et trois rondelles plates (8) pour chaque bras.
RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 3 Fixez le Plateau Du Siége (4) au coussin du siège (5) avec les flèches vers la partie avant du fauteuil en utilisant quatre Vis pour la plaque du
siège (10) RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 4 Fixer le support du dossier (11) à l'arrière de la plaque du siège (4) avec trois vis de support de dossier (10).
RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 5 Insérer le vérin pneumatique (3) dans la base (1), Placer le siège assemblé sur le dessus du vérin pneumatique (3)
et pousser vers le bas.
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR SERRÉ COMPLÈTEMENT
TOUTES LES VIS.
13-V77N1WA & 13-V88N1WA
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
12
8 X4
9
X4
5
5
7L
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . 1
4. Plateau Du Siége . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . 1
6. Assemblée du dossier . . . . . . . 1
7. Bras (7L & 7R) . . . . . . . . . . . . . 2
8. Vis pour les bras . . . . . . . . . . . 8
9. Vis pour la plaque du siège . . . 4
3
10. Vis du support du dossier . . . 3
11. Support de dossier
(préinstallé) . . . . . . . . . . . . . . . . . 1
12. Clé Allen . . . . . . . . . . . . . . . . 1
1
x4
4
3
1
4
QTÉ
LIMITED WARRANTY
SPACE ® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
•*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work
week by persons weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence,
alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty
does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded.
The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year
warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
© Office Star Products Septembre 2010
13-V22N1WA / 13-V44N1WA / 13-V66N1WA
13-V77N1WA & 13-V88N1WA
DELUXE CHAIR w/ VeraFlex™ BACK
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and
lift lever (1). To lower seat height sit on chair
and lift lever (1).
NOTE: It is normal for chair to slightly lower
under body weight.
• 2-To-1 SYNCHRO TILT ADJUSTMENT
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change the
tension of the tilting feature. Turn knob (2) clockwise
to increase tension and counter-clockwise to decrease
or ease the tension. To lock return chair to the upright
position and push lever (1) in. To unlock pull lever (1) out.
NOTE: Be careful not to loosen the back tilt adjustment knob com-
pletely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (3) in to allow the arms
to move up or down freely. Release the button (3) once
the desired height is reached.
• ARM WIDTH ADJUSTMENT
To adjust arm width, push lever (4) down, Adjust arm to
desired width, and lift lever (4) up to lock into place.
2
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.