Advertisement
Quick Links
Advertisement
Summary of Contents for IAS Multipoint 56
- Page 1 Multipoint 56 Wall Switch Multipoint Installation and Operation...
- Page 2 Multipoint 56 InstallatIOn Manual operation to operate a zone, simply press the button to turn the respective zone on or off. the green lED beside the button is illuminated to indicate the zone is on. Full airflow should be available from between ten seconds to two minutes after switching the zone on, depending on the stroke time of damper motor being used.
- Page 3 Multipoint 56 InstallatIOn Manual installation Once the number of zones for the wall switch has been selected place the zone labels in the appropriate position on the front of the switch prior to sticking the overlay in place. Connect the wall switch to the control box using the plug in cable.
- Page 4 Reece Group Pty Ltd Reece Group 118 Burwood Highway 118 Burwood Highway Burwood, Victoria 3125, Burwood, Victoria, 3125 Australia Australia Tel: 1800 032 566 Tel: 1800 032 566 Made in PRC...