Page 2
RECOMMENDED TOOLS Phillips Screwdriver Regular Screwdriver ROUGHING-IN DIMENSIONS For reference 7-3/16" (182.5mm) 3/4" NPT OUTLETS (19mm) 3-3/8" (86mm) 48" TO 54" FOR SHOWER ONLY (OPTIONAL) (1219mm TO 1372mm) 32" TO 42" FOR BATH/SHOWER AND BATH FILLER (OPTIONAL) (813mm TO 1067mm) 1-11/16"...
Page 3
KNOB (1). Tighten set screw with HEX WRENCH (5) to secure HANDLE BASE (4). For 818 Series Cross Handle: Align Pin on CROSS HANDLE (6) with hole in HANDLE BASE (4). Tighten SCREW (7). Insert INDEX (8) into CROSS HANDLE (6).
Page 4
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products. In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased along with proof of purchase.